Review of the Walk behavio r-tracto r-Keimgt 715 SK. Description of the model, operation, video work
Prorab GT 715 SK is a sem i-professional model because it is equipped with a 7-HP petrol engine. This is enough to process the website up to 1 hectare.
The use of attachments significantly expands the capabilities of the Walk behavior. A power selection wave is provided to make it easier to connect additional devices.
The presence of a manual start not only reduces reducing the model, but thanks to the simplicity of the design, you can start the engine quickly and easily.
Schneider is supplied in the configuration, whereby the width of the cultivation of the series reaches up to 83 cm. It is possible to set a processing depth of up to 30 cm.
By the presence of a gear with 2 front speeds and 1 at the back, the operator can work out a specific area without developing at the same time.
With the possibility of regulating the horizontal control handle and the height, you can adjust the Prorab hiking tractor to the operator’s growth.
Technical characteristics
| engine | Petrol, single cylinder, 4-stroke with air cooling |
| perfomance | 7 PS/5150 watts |
| The work volume of the cylinder, the cube. cm | 208 cm³ |
| Working width | 83 cm |
| Depth of work | 30 cm |
| The number of mills | 6 |
| Number of programs | 2 forward/1 before 1 |
| draft | Shaft / strap disc disc rear hand adjustment of the handle along the height side of the side of the handle |
| The weight | 84 kg |
Service and operation
It is necessary to run before work begins. In all manipulations, the forembled engine receives the required fat and the parts are rubbed together.
Playing is carried out for 3-4 hours if you work at 50% of the unit capacity. After driving in, the waste oil must drain and fill the new one.
If the device is used, share time for maintenance, which implies a number of actions:
- Check the oil and fuel level before work (the manufacturer recommends using gasoline with an octane number 92 and SAE 15W40 oil).
- Make sure the reliability of the fastenings of all screws.
- Check the voltage of the drive belt and tire pressure.
- Perform a detailed examination and repair when identifying thir d-party noises.
The service plan is specified in the user manual.
- The oil should change every 25 hours of prorab.
- When the gearbox, oil should be replaced after 100 mothers.
- Control levers must be lubricated once a month with lithol or solidol for their smooth operation.
- Prorab GT 715 SK storage
In order for the tractor of the walk behavior to work without any information, it must be carried out properly and correctly saved.
If you adhere to the following rules, make the device available for a reliable memory and a reliable assistant for yourself for many years:
- Before storage, you have to drain the entire oil and fuel.
- Wash the motblock and wipe the whole mud.
- Cover all metal parts with a thin layer of lubrication.
- Close the entrance and exhaust valve.
- Cover the device with a thick cover and store them in a dry, ventilated room.
Video evaluation of the work
Reviews of the owners
If you are the owner of the presented Prorab model, we invite you to rate a review on its advantages and disadvantages. Your opinion and review will help other users to decide to buy.
Review of PRORAB GT-715 SK engine blocks. Technical characteristics, features of application and operation
Groove 715 SK is designed to perform various agricultural work in medium-sized sections. He is accessible with a variety of hinge guns. It can be used to clear the territory of leaves and snow, to transport goods, to mow grass.
Technical characteristics
| engine | Petrol, single cylinder, 4-stroke with air cooling |
| perfomance | 7 PS/5150 watts |
| The work volume of the cylinder, the cube. cm | 208 cm³ |
| Working width | 83 cm |
| Depth of work | 30 cm |
| The number of mills | 6 |
| Number of programs | 2 forward/1 before 1 |
| draft | Shaft / strap disc disc rear hand adjustment of the handle along the height side of the side of the handle |
| The weight | 84 kg |
The device of walk-in motor is GT-715 SK
- A four-stroke internal combustion engine with a capacity of 7 hp will be installed on the PRORAB.
- The transmission with 2 speeds forward and 1 razad allows you to choose the optimal working pace.
- The ability to connect to the machine through the power shaft of a variety of hinge devices an air width of 83 cm to a depth of 30 cm.
- The steering wheel, adjustable in 2 planes, is adjusted according to the growth of the operator and the type of work being carried out.
- The mass of the machine is 84 kg, which is enough when performing plowing without soil surfaces.
Features of the application of the GT-715-SK model model
The GT-715 SK Foreman is rationally aggregated with various additional tools of the passive and active type (on the power shaft): grinders (goose legs), harrow, plow, closet, ground neck, adapters, mowers of various types, dumps , adapters, miniplicum.
Cutter Goose Paws Groun d-bearing Cupcac h-Harrow
service
The GT-715-SK Sprout consumes AI-92 gasoline, oil, the manufacturer recommends the SAE 15W40 grade. It is recommended to check the oil and gasoline level before work, check the reliability of fasteners of moving joints, bolts, tire pressure and drive belt tension.
Read more: PRORAB GT-120 RDKE engine blocks review. Technical characteristics, features of application and operation
Preventive work consists in the timely replacement of consumables, engine oil after 25 hours of operation, and gearbox – after 100 hours. Details and nodes requiring lubrication are treated with Liles t-Solidol universal water-repellent lubricant at least 1 time per month. Before draining long-term storage, fuel and butter, the walking tractor is thoroughly cleaned of dirt, dry with a rag covered with grease, valves closed.
Optimal SAE 15W40 LITOL-24 engine oil
With the characteristics of the PRORAB GT-715 SK Motor Block, you can find the implementation of adjustments and the installation of hinge tools, possible malfunctions and their elimination can be found in the factory operating instructions on the link:
Playing the GVE GT-715 SK model
For grinding and development of the main nodes and mechanisms of the Prorab engine block, the run is carried out. The procedure consists in testing the functionality of the walk-on tractor for 3-4 hours in economy mode at speeds not exceeding 50% of the maximum power. After the run is completed, drained oil is drained and replaced with a new one.
Video review of the GT-715 SK model
Reviews of the owners
Paul:
“Foreman’s 715 model since 2008 managed to buy very cheaply. Now I don’t see this for sale. I was confident that a reliable unit, simple and not capricious. The quality of gasoline is not demanding, it consumes no more than 2 liters per hour, even on heavy land. From the hinge, in addition to grinding, harrow, plow, I use, there is a perch. Last year he took another shovel and rake. good car”.
