Motoblock Tselina MB-800. Overview, characteristics, reviews

Dimensions and main technical parameters of the MB-800 walk behind tractor

Energoprom MB 800 is a model of a gasoline-powered multifunctional walk-behind tractor made by Russian specialists using Chinese-made components. This format of joint production allowed the manufacturer to create inexpensive devices with good performance.

This model is designed for cultivating land on a private or agricultural farm. In the presence of additional equipment, Energoprom can be used not only for plowing the soil, but also for hilling and planting vegetable roots. It is actively used not only to solve agricultural problems, but also in forestry, maintenance of parks and squares, performing tasks of finishing and maintenance of adjacent areas in housing and communal services.

Motoblock Energoprom

Let’s start the review of Energoprom brand motoblocks with a brief mention of the manufacturer himself. The Energoprom brand has Russian-Chinese roots.

Motoblock Energoprom

The components are manufactured at Chinese sites and then shipped to Russia, where they are assembled at a domestic plant. Thanks to this regulation, it was possible to significantly reduce the cost of motor vehicles and make them affordable for the citizens of our state.

Technical characteristics

“Energoprom” MB 800 has high power and allows deep tillage of the soil.

Motoblocks Energoprom Due to the presence of a 3-speed gearbox and a mechanical gearbox, it can move both forwards at two speeds and backwards, which increases its maneuverability and allows you to work on tillage in hard-to-reach or inconvenient places.

The motor, aluminum gearbox and control handle are mounted on a steel frame.

The steering wheel adjustment allows you to adjust its position both in the horizontal plane and with a change in height. If necessary, the control handle can be removed for the convenience of installing the Energoprom MB-800 walk-behind tractor for storage or during transport to the workplace.

Engine block cutter Energoprom

The tillage width is from 80 to 100 cm and can be adjusted due to the presence of detachable headers that can be added or removed from either side of the walk-behind tractor.

With the Energoprom MB-800 walk-behind tractor, it is possible to till the soil at a depth of 15-30 cm.

Powerful tillers are suitable for processing heavy layers of clay soil, which is an undoubted advantage of the Energoprom MB 800 model.

The walk behind tractor has a simple engine start system with manual start.

The reinforced clutch allows you to combine different brands of professional equipment, for example: “Neva”, “Oka” or “Cascade”.

Energoprom has a relatively low weight of 76 kg.

A capacious gas tank with a volume of 5.3 liters allows you to do a lot of work without additional refueling.

With the transport trailer mounted, the two-wheel tractor can be used as a vehicle and transport a load of up to 500 kg at a speed of up to 10 km/h.

Motoblock Energoprom MB-800 disassembled

Complete set of motoblock

When purchased, the basic package includes:

tillage cutters – 8 pieces;
Wedge to install a depth of plowing;
Pneumatic width wheels with a strong profile pattern that increases continuousness through virgin countries and outside the street;
Side windows;
The front support with a bike mounted on it, which enables us to simplify the movement of the walking tractor along the floor to plowing.

Motoblock Energopom MB-800

Application and device

The engine of the machine is gasoline, four stroke. It differs in the upper point of the camshaft and injection valves. The fuel is therefore more consumed and the device makes less noise.

The control scheme of the healing unit Jungfrau

The Virgin Lands MB-800 can be used for processing centers whose total area is 30-80 tomorrow. When working with the device, recommendations from the instructions must be observed – machines of this class need technological breaks between work. Motoblock Virginar MB-800 can continuously work for up to 5 hours.

Features of the Motobean engine MB-800:

does not exceed the content of physiological noise;
The number of harmful emissions is minimized due to the combustion method of the fuel due to the construction of the engine.
The engine cooling occurs in a mandatory manner, so that the tractor of the hood can work longer than analogue of the same performance;
The vibration generated by the machine is reduced;
The gearbox is reinforced, which means that the motorcycle block works much longer, less frequent repairs required.
A large selection of hinge devices makes the machine really functional.

Motor and fuel consumption

Regardless of this, it is necessary to live on the parameters of the motor block “Energyprom” MB-800.

This model uses the Shinray engine, which is an analogue from Honda and is not inferior in its properties: resources and overall performance. The effectiveness of his company is provided by the air cooling system. An increased exhaust gas window of the cylinder was generated for the drainage of the exhaust gas, which enabled the maximum work capacity of the four prank motor at 8 HP.

The operating volume of the engine is 208 cubic cm. For the operation of the walk-in tractor, petrol fuel from the AI-82 and 10W-30 engine oil are used.

Energyprom MB-800 is one of the most economical under similar models of other brands that are presented in the same price category on the market. The average consumption is up to 2 liters of gasoline per hour. However, it must be taken into account that the consumption can increase under the influence of several factors:

Load intensity;
the type of appendix used and its number;
The type of control of the technical tool;
The type of coating along which the movement is carried out: asphalt, an unpaved road, outside the street;
general operating conditions;
Air temperature.

READ

Garden care before the holidays

When operating properly, the engine can work for at least 10 years, which is a very high indicator of motoblocks of this price category.

User Guide

The operating instructions not only help to get to know the unit yourself, but also to teach how you work with it. It contains the following information:

Safety regulations.
The machine of the machine.
Ste p-S y-step assembly of the device.
Instructions for the first start of the energy unit of the energy industry, run s-in.
Maintenance.
Identification and elimination of malfunctions.

In the “Security Techniques” section, you are presented with dangerous units, the order of the safe work with the energy unit of the energy industry, which you and your relatives protect against injuries associated with the process of unit.

Motobo block power supply cycle

The unit comes from stock warehouse so the owner has to assemble it himself. In order for the assembly process to go correctly, the instructions have diagrams and drawings that describe the technical device and the stage s-stage of its assembly.

First launch

The most important phase responsible for the further performance of the tractor’s walk behavior. In the first stage it is necessary to fill the fuel tank with gasoline and oil crank.

The process of running for the power unit of the power industry should last from 10 to 20 hours.

Moreover, the engine heats up within a few minutes, and running – the grinding of all moving parts of the engine with a minimum and gradually increasing load.

Technical service

Motobobok maintenance is:

Daily care of the unit.
Inspection and replacement of oils once a month.
Preservation of a walkover for long-term storage.

The engine oil should change after 25 hours of tractor walk behavior. The manufacturer recommends using semi-synthetic options 10W-40 or 10W-30.

Oil 10W-30 TAD-17i oil

Replacing gear oil should be worked after 100 hours. For these purposes, you can use TAD-17I or TAP-15V brands.

All Energopom brand gasoline engine blocks work on AI-92 brand fuel.

The control levers must be lubricated with Lithol-24.

Work with the device every day, it is necessary to ensure quality care. Before starting agricultural work:

Check the amount of fuel in the tank;
We control the oil level in the crankcase;
We double check the fasteners and pull up the weakened ones.

At the end of the field work:

We clean the dust and dirt unit and wash with water;
We wipe the dry and dry in the fresh air;
Lubricate the moving parts with oil, Solidol.

Remember that after 25 hours of elaboration, it must completely drain the waste oil and pour fresh.

The main problems and ways to eliminate them

Four types of breakdowns are most commonly present:

The walk tractor started on and when it starts. It will stand immediately.
A noise comes from the gearbox.
The clothes stopped spinning.
The wheels don’t turn.

Problems with starting a walk tractor can occur for the following reasons:

Problems from the spark plugs (burned, smashed, getting rid of the tip, etc.). When the candle is smoked, it is enough to clean it and rinse it thoroughly in gasoline. If the candle is burnt or wet, replace it.
Magneto out of order or his blades wedges it. In the first case you need to replace the magneto, in the second it can be adjusted.
The carburetor failed. It can be disassembled, sorted and cleaned, but when the main details wear out, it remains only to replace it.
The fuel filter is clogged – replace it.
The hoses are clogged and not delivering fuel – replace them.

The noise from the gearbox indicates:

The oil ends.
The fasteners came loose.

The cutters stop rotating in the following cases:

The earth shines on the rotors, and stones are packed – to clean.
The fasteners shattered.
The clutch cable is weakened – replacement.

The wheels don’t turn because:

The clutch cable is weakened – replacement.
The fasteners were smashed – draw.
The belt stretched – exchange.

Additional Attachments

The special advantage of this model is the extended possibilities for using attachments, which allow different types of work. Energoprom reliability allows you to use heavy assembly equipment developed during operation for models from other brands. For example, you can use devices from Neva or Cascade.

Additional equipment was created, taking into account all possible needs of customers who can not only buy energy from land for plowing.

The buyer can also choose:

Hiller;
a number of auxiliary mills;
Transport car for transporting goods;
Mower;
Potato switches and potato interruptions that considerably simplify the landing and harvesting this root harvest;
Pomp for pumping water.

The designed equipment of the Cascade Motor note can also be used for the energ y-grown engine note

Prices in Russia

The average price of the new engine unit of the Energy Industry MB-800 is only 20,000 rubles. Therefore, one of the most affordable motoblock is not only in Russia, but also on the world market. The machine combines the advantages of cos t-effective and universal devices and, taking into account its price, it is practically without defects.

READ

Review of power tillers and trimmers from the brand Makita. Features, reviews

The MB-800-energie industrial model successfully competes with the motor blocks of leading manufacturer patriot T 7.0 Kaluga, Aurora Gardener 750, Elitech KB 472K, Hauter GMC 7.5, OKA MB-1D1M10 etc. etc.

operation

In order to increase the lifespan of energy, it is not necessary to start the work for which it is bought immediately.

Before starting work, it is important to run the right run to increase the resource of the work of all units and knots.

See also: Husqvarna 445e II Chainsaw Review. Description, technical features and user ratings

Motoblock Energopom MB-800-TOP view

All node connections are checked before the first start. In order to carry out the race, the oil must be filled in properly, the level provided for this model is taken into account. The volume of the filled gasoline must also meet the requirements for the requirements for the runnin g-I n-I n-I n-I n-I n-In requirements.

After the gas station, you have to carry out the first start of the engine and provide it idle for a few minutes. Then you can gradually increase the load and increase the speed to a maximum. With the change of work under load and in idle, the tractor of walking should work for at least 40 minutes (with constant control of the oil and fuel level).

With the use of EnergyProm MB-800, it is important to remember that the proper operating time increases the lifespan and minimizes investments in possible repairs. The total duration of the term of 10 to 15 hours. During this time, the economical operating conditions should be selected for the Walk behavior, under which it should not work with full performance.

In the first 8 operating hours, it is necessary to select the average performance and not to increase the load. If you want to bring the cargo with a transport car, you have to control the loading and do not move more than 250 kg.

The topic: tips for choosing a walk tractor

Publications on the subject

Motoblock “Neva” and hanging equipment

Operating rules for the technical properties of the engine block cascade

Features of the most powerful motoblocks

The motor of the walk is Patriot

The On e-Cylinder engine is reliable, small and consumes little fuel. It is installed on all models. The engine was specially developed for the walking areas of this company. Ordinary AI 92 petrol is suitable as fuel.

It is important to know that oil cannot be added, otherwise you will not only help the engine but also to break. The technology is not sensitive to fuel quality, which is also a plus.

The Patriot P175FB petrol is equipped with a cast sleeve. Therefore life becomes more. The performance is 7.8, the weight 15 kg and the tank capacity 3.6 l. The engine volume is 220 cm3.

transmission

There are two types of gear and chains. The first is used for models with a powerful engine. It differs only in the type of coupling, the life resource remains high. However, the service takes time.

The second type is fully installed with a Riemkuppen. Details are easy to find on the Internet, so the repair will not be a difficult problem.

Specific models

Motoblock Energopom MB 800 is a powerful equipment that is suitable for working on a garden plot, a farm, a park or forestry. Structurally, the Energy Industry MB 800 is practically not different from similar models. A motor, transmission and control of the control are installed on a strong steel frame. This model uses a professional 8 PS shinray engine that is an analogue of the Honda engine. The unit is characterized by a large resource and high performance.

Energyopom MB 800 is equipped with a standard transmission with 3 speeds (2 front, neutral, 1 behind). The presence of reverse and compact dimensions makes this Walk tractor incredibly maneuverable and enables you to treat the soil even in hard places.

The energy industrial model MB 800 has a comfortable control handle that enables the earth to cultivate the earth in hard places and carry out interchangeable hilling. The pen can turn 360 degrees. If necessary, it can be removed to facilitate the storage or transport of the device. The steering wheel is also regulated in height and horizontally.

Motoblock Tselina MB-800. Overview, characteristics, reviews

The MB-800 Motoblock is a device for agricultural, municipal and agricultural works that are equipped with a petrol engine, the capacity of which is 8 hp. In the Virgin Motoblock line, this model can be seen as one of the powerful, productive and popular among farmers. The brand of the installed engine is the Lifan 173 OHV.

Motoblock Jungfrau Boden MB-800

The purpose of the Virgin Block Virgin MB-800:

Soil processing – Chernozems, soft prepared soil, plow dense soils for planting plants;
Work, for example, with various attachments with mills as cultivators;
Harvest – dig potatoes;
Pour, mow grass;
Collection of prepared hay (hinge devices are used – forks);
Community work – cleaning the territory, with the help of a round brush, throwing away snow;
Transport.

READ

Phytophthora on cucumbers and peppers. Methods of control. Disease resistant varieties

Motobogin Clubs Mbine MB-800

Lead cable

Features of the exchange and adjustment of the toothed belt

Dewy belts in the gas mowers with electrical drive are most often installed on two straps. One of them is located directly on the motor shaft and can move according to the weaker of the fastening elements. The driven pulley is usually motionless. To replace the gang belt in such a lawn mower, you must carry out the following steps:

Covers the tool.
Put the lawn mower so that the drive mechanism has comfortable access.
Remove the protective case.
Loosen the repair screw and lead the pulley on it.
Place the leading pulley towards the filming to loosen the belt tension.
If the belt is torn or absent, carry out points 1-5.
First put a new belt onto the leading pulley.
Throw the belt on the edge of the driven pulley.
Move the engine into its original position with a leading pulley to pull the belt.
Wrap the fastening screws.
Check the belt tension-ES should not hang more than 4-5 mm.
If necessary, tighten the belt by first turning and pulling the fastening screws of the electric motor.

After the exchange and adjust the lawn mow belt, set a protective cover in your place.

Technical characteristics

Motoblock Virgin Grounds MB-800 begins manually. Dimensions of the machine: length 1600 mm, height 1100 mm, width 460 mm. There are such parameters: Kei l-up Adhesion, tw o-speed gears. The maximum engine speed is 3600 per minute. The tank capacity is 6 liters with a motor volume 242 cubic meters. The average fuel consumption per hour is 374 g/l/hour. The dimension of the bikes is 7-8×19. The weight of walking behavior tractor in unexpected form and without additional equipment is 110 kg.

Characteristics:

In the factory, the crankcase of the virgin areas are seasoned with the same oil.
The manufacturer recommends using the oils of this manufacturer and for the gearbox.
Type of petrol-high cleaning, AI-92;
Motoblock can also be used in winter, maximum – up to minus 10 degrees Celsius;
It is easy to control the machine, all main control levers are near the holder.
The number of speeds is 4, of which the rear gears 2 are;
The device has a classic layout of the fuel tank, the gearbox and the engine. All main nodes are in the upper part of the structure. You can easily make repairs or add fuel/oil.

Characteristics of the exchange and adjustment of the clinic

Are used for some models of lawn mowers or s o-called streaming carriers. They differ in a great efficiency of the transmission of the torque and are therefore usually installed on straps with a relatively small diameter. Clinical belts can be found in professional lawn mowers that are designed for long and variable loads. They are also common with many batteries.

The exchange and adjustment takes place according to the following algorithm:

Install the lawn mower to access the drive mechanism.
Auction screws the screws that repair the protective shield in the rear part of the lawn mower.
Screw the cutting of the cutting nozzle.
Screw the mother of the belt voltage video.
Remove the belt from the drive mechanism.
The installation of a new belt in the sequence, reverse disassembly.
Check the belt voltage.
If it is more than 4-5 mm, weaken the bolt of attaching the voltage roller and achieve a stronger voltage.
Make sure that the new belt does not violate the elements of the gas mow housing.
Install the cutting nozzle and the protective shield on the spot.

Application and device

The engine of the machine is gasoline, four stroke. It differs in the upper point of the camshaft and injection valves. The fuel is therefore more consumed and the device makes less noise.

The control scheme of the healing unit Jungfrau

Features of the Motobean engine MB-800:

does not exceed the content of physiological noise;
The number of harmful emissions is minimized due to the combustion method of the fuel due to the construction of the engine.
The engine cooling occurs in a mandatory manner, so that the tractor of the hood can work longer than analogue of the same performance;
The vibration generated by the machine is reduced;
The gearbox is reinforced, which means that the motorcycle block works much longer, less frequent repairs required.
A large selection of hinge devices makes the machine really functional.

Features of replacing the V-belt

The wedge-shaped belts are most common on the rotary-type domestic lawn mower. Their exchange and hiring are carried out according to the following algorithm:

Install the lawn mower on the side for convenient access to the drive.
Remove the drive mechanism guard by turning away the screws or snapping the latches.
Remove the belt lock near the leading pulley.
Unscrew the blade fixing screw.
Carefully remove the knife.
Remove the driven pulley from the shaft with the belt.
Put a new wedge belt on the leading shaft.
Introduce the belt on the driven pulley, install it on the shaft.
Install a knife in your place and fix it with a bolt or nut.
Install the belt lock.

READ

Peculiarities of feeding grape bushes

In such designs, adjustment of the lawn mower drive belt is not typically provided.

maintenance

It is recommended to use MB-800 after incorporating with the instruction manual. This document describes in detail the process of assembly, inclusion that runs in the tractor of the walk behavior. The unit needs to be assembled, seasoned with fuel, and then ru n-in. The duration of this process is 5 to 20 working hours. Motoblock at this time should work in an economical mode. After running, you can increase the load on the device.

Virgo’s device is virginal

Do not mix different types of oils and use the ones recommended by the manufacturer. The frequency of changing the oil – by the first 50 mothers, then at least once a season or after 100 hours of work.

How do I choose a replacement belt?

Before replacing the old belt with a new one, you need to choose the right one. Pay attention to the following criteria when making your selection in the online shop:

Manufacturer.
The lawnmower model.
The type of belt is wedge-cut, clinical, tooth.
Compatibility (usually indicated in the description if this is an analogue).
The original belt number.
External resemblance.

If you find it difficult to select a suitable belt for your lawn mower model, consult an advisor.

General information, purposes and design features

In the Walk behavior tractor, mainly Chinese details are used. However, this does not mean that problems with the reliability of the device can arise. On the contrary, the Motoblock rather has a good safety margin, which is confirmed by the reviews of the real equipment owners. The Walk behavior tractor has a fairly simple design, characterized by high maintainability.

The range of tasks of the motor unit of the power industry MB-800 is quite extensive. The technique is capable of performing work associated with cultivation, hilling, plowing and planting of root crops. In addition, in the presence of special equipment, it is possible to transport heavy loads or use the machine as a water pump. In addition, many owners prefer ground hooks to increase the stability of the devices on the road. In addition, hooks and weights help well on the road or when treating soil to a great depth.

Among other design elements of the Energoprom MB-800 walk-behind tractor, we note the ability to adjust the steering wheel – in height and horizontally. It offers working comfort and thereby increases work productivity, since the driver is less tired. The steering wheel can be rotated up to 360 degrees. Thanks to this, there should be no problems with maneuverability and quickly passing obstacles.

The two-wheel tractor is equipped with a PTO shaft, the model under consideration is a three-strand pulley. This mount supports the installation of a variety of devices that meet the needs of every owner. The good news is that the manufacturer offers the possibility to install only certain options that you can choose at your own discretion.

Energoprom MB-800 is equipped with a mechanical transmission that allows you to move forward and backward. Special attention should also be paid to the hardened milling cutters, which are already included in the basic package. They are an indispensable tool for those who frequently use equipment on heavy soils, as well as when working on virgin land. In addition, the owner will find pneumatic wheels with excellent off-road mobility as standard. The wheels have a deep profile with a special pattern. By the way, the profile is made in such a way that the tread does not get clogged with dirt, which is very important when driving on dry surfaces.

By mounting a trailer, the potential of the walk-behind tractor is significantly expanded, turning it into a full-fledged mini-tractor. The manufacturer recommends loading the trailer no more than 500 kg.

In order to increase interest in the model, improve competitiveness and preserve the consumer characteristics of the walk-behind tractor, the manufacturer has equipped the walk-behind tractor with a universal design. In addition, it is so versatile that even the heaviest attachments of other walk-behind tractors can be mounted on the machine. In particular, practice has shown that spare parts and attachments for Neva and Cascade two-wheel tractors are best suited for a two-wheel tractor.

The power of the Energoprom MB-800 walk-behind tractor is the responsibility of the imported Shinerey power plant, which is almost a complete analogue of the Japanese Honda and Lifan engine. The power plant is equipped with a durable crankshaft. It was also possible to improve the outflow of exhaust gases, largely due to the enlargement of the cylinder’s outlet window. This feature made it possible to increase peak power.

Additional Attachments

Additional equipment was created, taking into account all possible needs of customers who can not only buy energy from land for plowing.

READ

Autumn in the garden. What can you forget

The buyer can also choose:

Hiller;
a number of auxiliary mills;
Transport car for transporting goods;
Mower;
Potato switches and potato interruptions that considerably simplify the landing and harvesting this root harvest;
Pomp for pumping water.

The designed equipment of the Cascade Motor note can also be used for the energ y-grown engine note

Characteristics and purpose of “Energoprom” MB-800

Engine block Energoprom MB-800

Specific models

Features of the MB 800 power industry motor unit:

Improved pairing compatible with Cascade, OKA and Neva models;
Reinforced cutters that allow you to treat heavy soil. They consist of 4 groups with the function of removing and regulating the plowing width on each side.
aluminum gears (small mass, high strength);
a comfortable and ergonomic handle that facilitates the operation of the operator;
equipment with a large working resource;
The presence of a “light start” system, which safely guarantees that the engine can start by manual start;
A roomy gas tank that delivers longer jobs without refueling.

Motor and fuel consumption

Regardless of this, it is necessary to live on the parameters of the motor block “Energyprom” MB-800.

The operating volume of the engine is 208 cubic cm. For the operation of the walk-in tractor, petrol fuel from the AI-82 and 10W-30 engine oil are used.

Load intensity;
the type of appendix used and its number;
The type of control of the technical tool;
The type of coating along which the movement is carried out: asphalt, an unpaved road, outside the street;
general operating conditions;
Air temperature.

When operating properly, the engine can work for at least 10 years, which is a very high indicator of motoblocks of this price category.

Prices in Russia

Features of the application

In order to extend the service life of the MB-800 engine note, the first start should be carried out before the first start. It is carried out according to the following plan:

Check oil and fuel levels in tanks. Add if needed
Start the engine and let it work at low speeds for some time
Turn the gears
Work with the work without increasing the load more than 60% of the maximum power. Operate in this mode about 10 hours
After completing the run, change the oil t o-in

Download the user manual of the 4th stroke petrol engine Lifan