Moving snowman lynx: description, characteristics and reviews

Review of snow removal vehicles Luchs. Operating instructions, owner checks

JAHLE DEVELOPMENT AND DEVELOPMENT RELEASE THE ZUGAUSIAN DEVELOPMENT “Lynx” to create high-quality snow breakers that are just as suitable for our latitude and our Russian buyer. The small cost makes the company’s goods even more attractive and affordable. The snow removal technology of this brand is easy to use and maintain, simplicity of design and ergonomics.

The components and working mechanisms of the snowman – “Lynx” were created specifically for work in the harsh conditions of Russian winters.

The company “Lynx” is the young production of Belarus, which concentrated all its forces on issuing high-quality, but budgetary garden tools for the domestic user. A special climate, severe frosts and increased humidity require special equipment that is not inferior to expensive overseas brands. With this idea, designers and designers released a series of snow offerings “Lynx”.

description

Snowmen Lynx are products produced by Nikkey (PRC) which placed its production sites in Western and Eastern Europe. In particular, companies assembling garden and construction equipment under the Lynx brand are located in Belarus. Very little time has passed since the moment when the “Luchs” brand was created, but the Belarusian companion has already published and successfully presented to the world community:

• self-clad “Lynx” snowpack equipment;
• Benzoko’s “Lynx”;
• chainsaws etc.

Snowman Lynx SM 6.5 a

Service, main malfunctions and their solution

In order for the snow losses of one model of a model to differ in durability and serviceability, you should properly bypass the devices. In the instructions for use, you will find the basic rules and the Phased guide on how to collect and serve a snowman, how to use them correctly.

For example, the manufacturer itself recommends the use of clean high-class gasoline, the octane rating of which is not lower than 92. The most suitable brand is AI-92 fuel. Good gasoline is the key to the easy and smooth work of the snowman without frequent breakdowns and failures.

In the reviews, you can often see that users face some difficulties at the beginning and during work with the lynx. In the user manual, the manufacturer described the most common malfunctions that the owner of Snowpet devices can face. Some of them:

1. If you do not start the engine, you should check the presence, level and quality of gasoline in the fuel tank. Also, the reason can be hidden in the absence of sparks in the spark plugs or their breakdown. Also a possible option is the wear of the piston group, an incorrectly established throttle valve.
2. In the event that the snowman does not deprive the snow, a malfunction with a V-belt, a cut screw is possible; The clutch coupling can become heavily clogged with snow or garbage.

The preparation

Snow blades “Lynx” are designed by all types of snow masses for cleaning small and medium adjacent areas in winter. The brand only produces petro l-powered modifications that are characterized by excellent performance properties and maneuverability under difficult climatic conditions.

The Lynx brand produces the following modifications of petrol snow plows:

1. The snow blower “Lynx” SM 5.5a is sel f-driving.
2. Sel f-driving snow plow “Lynx” SM 6.5a.
3. Snow plow “Lynx” SM 6.5V with own drive.
4. Sel f-driving snow blower “Lynx” SM 7.0A.
5. “Lynx” SM 7.0b, sel f-driving snow plow.

Snow mill “Lynx” SM 5.5A with own drive

Weight of the snow blower 62 kg. A 4-stroke petrol engine G168F with a displacement of 5.5 liters is hidden in a robust housing. With. The power plant is started via a hand starter (starter cable). The snow plow is equipped with a wheel drive, tubeless air tires with a winter profile.

Snow mill Lynx SM 5.5a

There is a unlocking (splint). Manual transmission, 5 forward gears and 2 backward gears. Type of transmission – friction disc. The throwing width, ejection and deflector position can be adjusted manually. The gearbox can be folded together and enclosed in an aluminum housing. Dimensions of the snow cheese: 51/41 cm toothed metal snail.

Complete specifications:

Recording width	50cm
Setting the position of the snow catcher	mechanically
Adjustment of the snow slide	mechanically, from the control panel
sel f-driving	There is
Type of transmission	stepped
Type of drive	on wheels
Type of the engine	petrol
Engine manufacturer	London
Engine power, PS	5.5

Sel f-driving snow plow “lynx” SM 6.5a

This sel f-driving snow blower is equipped with a 6.6 hp carburetor engine. With. Start the engine via a manual start cable. The snow plow weighs 72 kg. The drive system consists of pneumatic, tubeless wheels with a strong profile to improve maneuverability and continuousness. The unlocking with a splint is planned.

Snow mill Lynx SM 6.5 A

Friction transmission. Mechanical gearbox with four forwards and two backward passages. The dimensions of the metal snow inlet are 56/51 cm, the position and direction of the deflector and the slide are set manually. Tw o-stage drill with notches (ice ax), made of metal.

Snowpflow Lynx – construction features

In contrast to most modern snow plows, the Lynx snow plow has a fairly simple design. Thanks to this, even a beginner who has no experience in the operation and maintenance of this type of equipment can repair the main mechanisms of a snow blower. The snow plowing device consists of the following elements:

• Motor-Most Lynx snow plows are equipped with 4-stroke engines, which can easily survive even frost up t o-30 ° C. Such engines are not equipped with air filters, which significantly simplifies their operation and maintenance. Lynx household snow cheesers are equipped with manual starters to start the engines, and cars of the professional classes are equipped with electrical starting mechanisms.
• Gearbox – inexpensive snow blower for home use are only supplied with a gear at a speed. More expensive models of Lynx snow refrindrodles are equipped with switching gears with several speeds or variator boxes;
• The gear – this element serves to transfer rotating effort from the engine to the screw mechanism of the snowman. The lynx’s snow spaces include increased gears from permanent steel alloys that are protected from corrosion and random strokes.
• The screw mechanism – the snow removal technology generated by the company is equipped with jagged or smooth screws. At the same time, almost all of the snow) are equipped with a on e-time snow mass fence system. In order not to damage the coating of the adjacent area, snow attacks are equipped with protective rubber strips.

• Tires and wheels – For better stability with slippery coating, snowball players are equipped with powerful expanses. Tires can have a V-shaped or x-shaped profile pattern. The independence of the shape of the drawing all tires offer a good cross writer in difficult operating conditions.

Thanks to the wel l-though t-out design of the snowman, it easily withstands the use under difficult conditions. The spare parts of the individual snow care workers are very resistant to wear and do not require a frequent replacement.

Features of the snow removal machines “Luchs”

1. Sel f-clad vehicles.
2. Petrol engines.
3. No binding to the network.
4. High energy.
5. Cycling.
6. Powerful winter step.
7. GPP with a large number of speeds, vice versa.
8. Friction clutch.
9. Adjustable release.
10. Starting from a manual or electric starter.
11. Release the differential with a spinning network.
12. Metal bucket, gutters, distraction.
13. Meta l-Tothered joint is two levels.

A few words about the engine

Lynx of a snow pipper is usually supplied with a petrol engine. The same option is most preferable for an average client. What is understandable. In fact, spare parts for such an engine are easier and cheaper for repairs. There is something like a level of power:

• Electric motors.
• Petrol engines.
• Diesel engines.

Gasoline snow is known for being stronger than electrical, but weaker than diesel. That means this is a golden remedy. Basically, the 92nd gasoline serves for these machines. The vast majority of petrol snowball players are equipped with an electric starter that immediately drives the engine, even if the farm has a serious minus. If there is an electric starter, it can work according to two scenarios: from the network 220 volts or from the battery built into the snowman.

User Guide

The operating manual is attached to every snowman “lynx” collected in Belarusian factories. The instruction is divided into the following sections:

1. The device of the snow removal machine from TM “Lynx”.
2. Assembly of a snowman.
3. Security measures during work and maintenance.
4. Technical features of the snow surface.
5. Gear.
6. The introduction of a snowman in operation.
7. Maintenance.
8. Problems and their elimination.

gear

The kit contains:

• Snow bracket TM “Lynx”;
• Candle key;
• Spatula for cleaning the gutter;
• Instructions.

Introduction of the snowman’s gluchs in operation

1. The car is assembled.
2. The fuel tank is filled with high gasoline.
3. Engine oil is poured into the power plant.
4. It is connected in/in the wire, a light of the ignition is screwed.
5. After the descriptions, the engine begins in the guidance.
6. The performance of organs and systems is checked.
7. The position of the bucket is set.
8. The required speed of movement is set.
9. The angle and the emission area are configured.

Basic equipment and production of snow breakdown “Luchs”

By buying a new sno w-covered “lynx” you get complete equipment yourself and spare parts for the compilation and a comfortable maintenance of the Snowpock model. In addition to the tool yourself, you will also receive:

• Candle key to turn the spark plugs;
• a special shoulder blade that is comfortable to clean the groove of the snowman in front of the sticking snow;
• Manual;
• Technical documentation and guarantee card.

Models of the snow removal equipment “Luchs” in Belarus are manufactured. Some details and components are bought abroad, which of course indicates an even higher quality of the finished tool.

Evaluation of the best snow in 2019

category	location	Surname	valuation	Price
The best professional snowmakers	1	Hyundai S 7713-T	9.7 / 10	120,000
2	Pubert S1101-28	9.6 / 10	34 909
3	Honda HSS655et	9.4 / 10	144 200
The best inexpensive gasoline snowball players	1	Hyundai S 6561	9.7 / 10	10 300
2	Patriot Pro 655 E	9.6 / 10	54 390
3	Interskol SMB-650E	9.5 / 10	34 909
4	Champion St656	9.2/10	32 500
5	Redverg RD24065	9.0 / 10	23 490
6	DDE ST6560L	8.9 / 10	26 280
The best electrical snowman	1	Daewoo Power Products DAST 3000E	9.4 / 10	16 990
2	Toro 38302	9.0 / 10	19 990
3	Monferme 26087m	8.4 / 10	11 990

The best professional snowmakers

A heavy 135-kilogram-gnemann from Hyundai can come somewhere thanks to a powerful 383-cubic engine of his own production and traces. The gearbox has 6 front and two rear, the caterpillar drive – distinction with the possibility of blocking. Well, the update of the model of the Hyundai Snow impairments clearly turned out to be interesting.

All controls are concentrated on a common panel that is raised under the handle: it is comfortable when everything is at hand. In addition to the usual lever of the drive control, the differential locking lever next to the handle, which has also settled on the left handle, the snow emission handle is located next to the handle. The release area can also be set directly with the left, at least with the right hand: the corresponding lever is located in the middle of the panel. Well, it is more convenient to change speeds with the right. A wide LED headlight is also installed in the viewing panel of the control panel, and the rudder of the steering wheel is equipped with heating. Both light and heating are switched on on the plate.

The width of the edging strip is 76.4 cm, the depth is no more than 54 cm. The proprietary mechanism of the screw costs well with the strip and wet snow, but the lot is not a problem at all. The screws of the screws can be moved with the pedal without a stop and the frozen frozen nuts with keys.

Snowmen lynx. Technical features and operating rules

JAHLE DEVELOPMENT AND DEVELOPMENT RELEASE THE ZUGAUSIAN DEVELOPMENT “Lynx” to create high-quality snow breakers that are just as suitable for our latitude and our Russian buyer. The small cost makes the company’s goods even more attractive and affordable. The snow removal technology of this brand is easy to use and maintain, simplicity of design and ergonomics.

The components and working mechanisms of the snowman – “Lynx” were created specifically for work in the harsh conditions of Russian winters.

The company “Lynx” is the young production of Belarus, which concentrated all its forces on issuing high-quality, but budgetary garden tools for the domestic user. A special climate, severe frosts and increased humidity require special equipment that is not inferior to expensive overseas brands. With this idea, designers and designers released a series of snow offerings “Lynx”.

Focus on snails

Of course, the designers of Lynx machines devote a lot of time to the snails. This detail is the first to come into contact with the snow pack and, oddly enough, often needs to be repaired. The fact is that when foreign objects get into the augers, shear bolts are often damaged.

Augers are aggressive shovels whose job is to break up the edge of the snow crust or simply rake loose snow deep into the car. Also, this mass enters the rotating impeller and flies away from the machine through the chute. It depends on which augers are installed on the machine how well it can get through a difficult area with snowdrifts and wet snow. If the augers themselves play the role of a rotor, throwing the snow aside already at the stage of its destruction, then such a machine will be cheaper, but, most likely, it will remove snow from the path less carefully.

Screws are either metal or rubber. Both of these options are equipped with Lynx snow plows. The snow plow with rubber auger moves smoothly over the ground under the snow. This is a great option when you need to clear snow from a ceramic garden path.

Criteria for choosing a utility snowmobile

To choose a utility-type snowmobile, you must first study the offers on the market, read reviews and consult with more experienced comrades. The main criteria should be:

• engine power, it should be more;
• Pay attention to the location of the skis, the track should be 900-1000 mm and the calculation is made between the inner edges of the skis.

The rest of the indicators can be completely different, they do not particularly affect the characteristics.

We compared the Taiga and Lynx snowmobiles. There is no point in unequivocally advising to buy one of them, everyone has to decide for themselves what is more suitable.

What do you need to know about the transfer?

Depending on the specific kit of the Lynx brand machine, a snow plow can either have a full multi-speed gearbox or not be able to shift them at all. Each option is good in its own way: when dealing with a huge snowdrift, it is much more reasonable to move the walk-behind tractor forward with your hands, and not to bring it to a fixed speed. At the same time, the lack of a gearbox can increase the operating time in a large area that only needs to be cleared of loose snow.

Review of snow removal vehicles Luchs. Operating instructions, owner checks

Snowmen Lynx are products produced by Nikkey (PRC) which placed its production sites in Western and Eastern Europe. In particular, companies assembling garden and construction equipment under the Lynx brand are located in Belarus. Very little time has passed since the moment when the “Luchs” brand was created, but the Belarusian companion has already published and successfully presented to the world community:

• self-clad “Lynx” snowpack equipment;
• Benzoko’s “Lynx”;
• chainsaws etc.

The preparation

Snow blades “Lynx” are designed by all types of snow masses for cleaning small and medium adjacent areas in winter. The brand only produces petro l-powered modifications that are characterized by excellent performance properties and maneuverability under difficult climatic conditions.

The Lynx brand produces the following modifications of petrol snow plows:

1. The snow blower “Lynx” SM 5.5a is sel f-driving.
2. Sel f-driving snow plow “Lynx” SM 6.5a.
3. Snow plow “Lynx” SM 6.5V with own drive.
4. Sel f-driving snow blower “Lynx” SM 7.0A.
5. “Lynx” SM 7.0b, sel f-driving snow plow.

Snow mill “Lynx” SM 5.5A with own drive

Weight of the snow blower 62 kg. A 4-stroke petrol engine G168F with a displacement of 5.5 liters is hidden in a robust housing. With. The power plant is started via a hand starter (starter cable). The snow plow is equipped with a wheel drive, tubeless air tires with a winter profile.

There is a unlocking (splint). Manual transmission, 5 forward gears and 2 backward gears. Type of transmission – friction disc. The throwing width, ejection and deflector position can be adjusted manually. The gearbox can be folded together and enclosed in an aluminum housing. Dimensions of the snow cheese: 51/41 cm toothed metal snail.

Complete specifications:

Recording width	50cm
Setting the position of the snow catcher	mechanically
Adjustment of the snow slide	mechanically, from the control panel
sel f-driving	There is
Type of transmission	stepped
Type of drive	on wheels
Type of the engine	petrol
Engine manufacturer	London
Engine power, PS	5.5

Sel f-driving snow plow “lynx” SM 6.5a

This sel f-driving snow blower is equipped with a 6.6 hp carburetor engine. With. Start the engine via a manual start cable. The snow plow weighs 72 kg. The drive system consists of pneumatic, tubeless wheels with a strong profile to improve maneuverability and continuousness. The unlocking with a splint is planned.

The transmission is friction. Mechanical checkpoint with four front and two rear speeds. The dimensions of the metal snow pickup are 56/51 cm. Adjusting the position and direction of the deflector and gutter manual. Two-step screw with zazubinen (ice axe) made of metal.

Read more: Motoboblock Lynx MBR-16 review. Technical characteristics. Device. User Guide

Characteristics:

Engine:	G168f
Engine power:	6.5 L.S.
engine volume:	196cc
Type of:	two stage
Type of movement:	self disguised
Processing width:	56 cm
detection height:	51 cm
Oil tank volume:	0.7L
The volume of the fuel tank:	6 л
The number of speeds forward:	4
The number of speeds back:	2
reducer:	Housed, aluminum
wheel diameter:	38x13cm
Innovation (reverse):	There is
Wheels:	Sounds
Start-up system:	Manual
Gutter Material:	metal
For cave snow:	There is
fuel consumption:	1.2 liters per hour

Snow removal machine “Lynx” SM 6.5 V self-propelled

The mass of the snowman is 74 kg. The G168F four-stroke petrol power plant offers 6.5 liters of power. With. Starting a power unit can be done in two ways: from an electric starter and manually using a jumper cable. As a transmission is the friction disc. A mechanical gearbox with 4 front speeds and 2 reverse.

The roller drive consists of two free pneumatic soil with an agricultural protector, which has increased the maneuverability of the snow deposit and the transverse run. Unlock wheels – shplint. Two metal screw with zazubins, the dimensions of the snow removal shovel: 56/51 cm. The headlight is being built. The position of the deflector and the gutter is adjusted manually.

Characteristics:

Engine:	G168f
Engine power:	6.5 L.S.
engine volume:	196cc
Type of:	two stage
Type of movement:	self disguised
Processing width:	56 cm
detection height:	51 cm
Oil tank volume:	0.7L
The volume of the fuel tank:	6 л
The number of speeds forward:	4
The number of speeds back:	2
reducer:	Housed, aluminum
Wheels:	Sounds
Start-up system:	Manual
Electric start:	There is
Gutter Material:	metal
For cave snow:	There is
fuel consumption:	1.2 liters per hour
Differential circuit:	There with a blow on the wheel axle
Snow emission angle:	190 °

Sel f-Proped Shnemaker “Lynx” SM 7.0A

The mass of the snow whistles is 72 kg. The petrol fou r-stroke engine is launched by a start cable and offers an output of 7 liters of the machine. With. The roof channel and the deflector control are mechanically carried out from the control panel, the release of the emission of up to 10 m is achieved. The gearbox is mechanical, there are two rear speeds and five front speeds.

The transmission is friction, wheel drive, the wheels are uncomfortable pneumatic, winter step. Two levels with zazubins, a screw diameter 30 cm, remote control. The dimensions of the bucket 56/54 cm.

Characteristics:

Engine type	petrol
Engine power, L.S.	7.0
Type of start	Manual
Number of programs	5 forward/2 before
Type of drive	Wheels
The volume of the fuel tank	3.6 (L)
Heat the pencils	no
Setting the exclusion direction	Manual
Control of the removal of the release	Yes
The width of recording	560.0 (mm)
Record height	540.0 (mm)
Exhaust area	10.0 (m)
The weight	82.0 (KG)

“Lynx” SM 7.0b, sel f-proceded snowstorm

The mass of the snowman is 72 kg. The housing contains a 4-stroke petrol engine with a capacity of 7 liters. With. The engine is inserted in two ways: a start cable, an electric starter (effectively in heavy frosts). The machine is equipped with a wheel drive. Pneumatic bikes with winter protection offer excellent maneuverability and intersection.

There is a differential circuit (shplint). Management of a distractor and groove from an operating control of the operator. The release area is up to 10 m.