Review: Motoblock Salyut-5X with a Honda GC160 5.0 engine – Ugly, but has been digging like a beast for 10 years
Years ago, my father proudly declared, “One son-in-law has a Honda car, another son-in-law has a Honda motorcycle. am i worse I also have a Honda now.” Of course we lost our jaws in surprise because we thought he had won. And he shows us that!
We clap our eyes and he: “Can’t you read? Hondas!
Ten years have passed since then, one son-in-law’s car has long since been sold, another son-in-law’s motorcycle has long since broken down, and my father’s machine digs and digs.
Either at his dacha or digging with us.
His design is of course antediluvian, it seems he was blinded by what was.
Ugly, looks like Wally to me.
You look at it and think it’s about to fall apart.
However, it digs like an animal!
After 7-8 months of hibernation, it starts up immediately with last year’s petrol.
This technique eats 92nd gasoline.
I don’t know about other walk-behind tractors, our throttle is just a knitting needle, how is this wobbly design still alive? And he does his job well.
Gears, sorry, dingy.
Processes 10 cells per hour – says the manufacturer. But it depends on how fast you dig and what kind of land, virgin soil, of course, will not be overcome so quickly.
With the nose down, our two-wheel tractor can only be placed on this leg.
That means you can put something down when it’s lifted.
But he doesn’t like it when his nose gets stuck in the ground and then doesn’t start again.
The plow has 4 installation positions, up to 30 cm working depth.
35 cm diameter cutters, one pair on each side. Made of thick metal. They even dig what seems impossible to dig.
Knives with sharp points so the earth doesn’t fly. Although what can fly there when driving at such speed?
A hole at the edge of the shaft tells me that some farming equipment can still be installed, but that’s not certain.
The entire handle can be removed. Which is what we do all the time when we carry a walk behind tractor in a car either to dad or to our job site.
The handle can be adjusted to the height of the excavator. Antediluvian method, of course, with a wrench.
In earlier photos you saw a low-set grip. But the husband rose beneath him.
And he went to dig in the virgin land.
Digging with this device is tough, a male occupation. I prefer to dig with a shovel (especially if it’s rail steel). It’s nice but slow. And when things have to be done quickly, the man digs with this excavator.
There are also wheels for it, which can be put on instead of cutting knives.
We have them practically new, unused. Since we don’t go fishing with a walk-behind tractor, we only use it for digging.
Motoblock Salyut 5X 5.5 Honda 160. Overview, specifications, reviews
Motoblock Salyut 5X 5.5 hp with a Honda GC 160 OHV engine, this is a universal machine with the appropriate technical equipment. She is able to perform many agricultural, economic works. Belongs to the category of modern technology with an optimal ratio of price and quality.
The han d-led tractor is equipped with an excellent Japanese engine with a solid lifespan and a fairly high maximum productivity – 10 hectares of land per hour. This modification is characterized by the most economical fuel consumption of your class. Thanks to these properties, Salyut 5x 5.5 hp. is one of the most popular motor blocks in the light group.
Motoblock Salyut 5x Honda GC 160 OHV engine with an output of 5.5 hp designed with innovative technologies and the latest design developments – modern materials, a blocking cylinder, a minimal number of parts.
The engine corresponds to the highest international standards and has the following advantages:
- electronic ignition system;
- the presence of an automatic decompressor;
- The upper arrangement of the valves;
- Fast start, regardless of the weather conditions;
- reduced vibration and noise level;
- High environmental friendliness.
Due to the exemplary assembly accuracy of the parts, the engine does not require a special entry time, but only an oil change after the first 20 operating hours. The manufacturer recommends the operating class of the oil SG, SF; Fuel – A i-92 car gasoline.
The routine maintenance is to change the oil every 25-50 hours of operation.
Gear Salyut 5x Honda GC 160 OHV consists of a gear and a clutch.
A tw o-stroke coupling is an absolutely reliable option for a han d-led tractor. A characteristic feature is a solid reduction gear that can withstand different loads. The gear shift takes place via a lever on it. Gear oil TM 5-18 (Tad17i).
The PTO slide (PTO) serves to assemble attachments that require a pawn. With the help of the reverse gear after you have previously turned the steering column, you can work on a han d-led tractor with active drive tools. When transporting goods, torque transmission is essential at full backward speed.
Motoblock Basis Salyut 5x 5.5l.S. With a Honda GC 160 OHV engine – a frame made of two stamped squares. The main mechanisms and components of the structure are installed on them.
Due to the reduced engine placement and the corresponding low center of gravity, Salyut is 5x very stable and has good maneuverability during cultivation.
With the help of the sawing rail, the depth of soil processing is set (up to 30 cm), depending on the soil quality, type of processing.
With soil processing, it is possible to use 6 floor milling option and to achieve the highest efficiency of the han d-led tractor – the width of a crossing is 90 cm.
Thanks to air-filled wheels with a high tread, the hand-led Tractor Salyut 5x Honda GC 160 OHV is completely indispensable with a mini trolley and an adapter for the transport of various goods. An important design feature when working with a small Wenderadius in a limited area is the option of deactivating one of the bikes.
|Fuel type:||Petrol AI-92|
|Motor type:||4-stroke, 1 cylinder|
|Max. Power, PS:||5|
|Working volume, Cu. cm:||160|
|Tank content, L:||3,6|
|Number of gears:||2+1|
|Construction width, mm:||670|
|Processing depth, mm:||300|
|In compensation:||4 milling cutters, bridge extensions, crowd|
In addition to the usual gardening work, the walking tractor is able to do other household and transport jobs effectively. Thanks to a large selection of various attachments, the walk-behind tractor is an indispensable helper in the summer cottage, in the garden, in the greenhouse, in the garden.
Attachments to the walk-behind tractor can be attached in one of the following ways
With PTO pulley
Community brush snow plow water pump (pump) rotary mower
Passive devices are mounted via a universal coupling or directly on the longitudinal axis
Potato planter Potato excavator Shovel-dump Okuchnik
To be adapted on the axis of the reduction gear
Cutter air wheels weights
Overview of the Salyut 5X 5.5 HP walk behind tractor with Honda GC 160 OHV engine
Feedback from Owners
Smirnov Valentin, Kharkiv region
“Of course, the Salyut 5x with Honda engine is more solidly priced than Lifan. Well worth it. It’s like the old German singer is still working for me, only the pulley has changed, and the PMZ has long collapsed. quality is quality. I do absolutely all work with a walk-behind tractor, mechanize everything that is possible: plowing, weeding, mounding, watering, mowing, planting and digging potatoes, transport. In winter I clear away the snow, I work on the machine. So if you figure it out, in 3 years I think it will fully pay for itself. ”
Golovach Sergey, Andrushevsky district
“Since Soviet times, I have been cultivating the terrain with an MTZ 0.6 cultivator for many years. Of course, I adapted to his tricks, in general it was enough for the garden. Now the assistants have grown up, the possibilities have expanded, they decided to buy a walk-behind tractor, they chose Salute 5x Honda 5.5 hp. The car fully met our expectations, we can say, a universal assistant. If in doubt, I can recommend it.”