Motoblock leader. Review of the installation, properties, attachments, use and operation

This machine is manufactured in the Degtyarev factory, which not only produces civilian and military products. Therefore, control over the production of finished devices is carried out in every manufacturing phase. Now this system specializes in the production of civil devices: soil formation, equipment for the food industry, LED products and motor vehicles.

Motoblock Leader MB-950

One of the most successful products is the leader of the Leader brand. They are characterized by the simplicity of design, operation and maintainability.

Types of petrol farmers

After the most popular classification, gasoline cultivators are divided into three groups: Weight:

Light (up to 20 kg). Such models are suitable for processing diagrams with an area of up to 10 hectares. With their help, you cannot dig or solve too heavy soil. The width of recording and depth of soil processing is small, but even women and older people can use such a device due to the reduced weight.
Medium (up to 50 kg). These devices have an increased power and are suitable for diagrams of 10 to 30 hectares. The cultivists of this group are equipped with wider tailors that enable the ground to loosen up quite deeply.
Heavy (up to 90 kg). The most powerful and productive devices that are suitable for diagrams from 30 to 50 acres. These units are designed in such a way that they plow the bottom deep, successfully work with the bottom of every density, and almost all fastening devices can be installed on the housing.

See also: MTZ 1221.3 Belarus: technical features, modifications, functions, use

https://zen.yandex.ru/media/ruchshhie-kultivatory-dlia-dachi-2021-reiting-top10-602310a1d6ee573249B1187
https://ewme.ru/luchshhie-zenzinovye-Kultivatory-dlja-dachi/
https://bestmarka.ru/top- 10-luchshih-zenzinovyh-kultivatorov-dlja-roofi-i-suicide/
https://expert-dacha.pro/tekhnika-dlya-dachi/kultivator-zinovyj.html
https://expert-kachestva.ru/luchshie-tovary/ogorod-i-sad/top-rejing-luchix-kultivatorov.html
https://tekhnik.top/luchshhie-zenzinovye-kultivatory-rejing/

Petrol engine leader

Motoblock Lider WM1100D

This is a typical representative of the mi d-range motor blocks. It has a petrol engine with a capacity of 8.97 hp.
The Motoblock Leader 1100D is equipped with a thre e-stage transmission: there is increased, low corridors and backwards.
This model weighs 120 kg.

Motoblock Lider WM1100A

This is a representative of a light series of Motoblocks leader. It is mainly used as a cultivator of soft soils. A motor with only 4 hp is installed on the device. The leader of the WM1100A weighs – 102 kg.

Motoblock Lider WM1100A

The main advantage of this model is the presence of an electric starter with which you can make the engine easier.

Motoblock Lider WM1050KX

This unit has an engine with 8.02 hp.

Motoblock Lider WM1050KX

The gearbox is mechanically with three steps.
The width of soil processing can be from 80 to 120 cm and the depth of the immersion is up to 30 cm.
The total dimensions of the motor block leader WM1050KX are 1500 × 400 × 900 mm.

This model is successfully used by owners of small gardens and small agricultural areas.

Motoblock Lider WMX650

This device has a special appearance. If most motoblocks are installed in return for pneumatic bikes, they are placed here in front of the car on a special trailer coupling. The width of your recording can be 24 to 65 cm. In order to give a greater balance, a support wheel is installed at the front. Thus, the optimal simplicity of management is achieved.

Motoblock Lider WMX650

The main working manager WMX650 is a petrol engine with 7 hp.
The mass of walking behavior is 85 kg.

Motoblock Lider WM11C

This is a tractor with a walk behavior with a dimensional dimensions of 980 × 570 × 760 mm. And a petrol engine with a capacity of 6.5 hp.

The width of processing in this model does not change and is 110 cm.

The preparation

Motobo block models can be trained and planned. In the case of hinge structures, N. numbers are added to the marking for marking, which show the detection value in measuring devices. The frame develops through a hydraulic system, which makes the device comfortable.

The MK-1 driver of the motor cultivator has a soil width of 380 mm. The plowing depth is 200 mm.

The engine is a 4-stroke petrol.
The diameter of the milling system is 250 mm.
The volume of the fuel tank is 0.8 liters.
The power of the engine is 4.5 hp.
Start – with a hand starter.
Cup – belt.
The gear is worm.
Dimensions – 125x52x125.5 cm.
Weight – 30 kg.

Leader 4

The leader 4-cultivator has direct frames of the loosening mechanism. It can move at a speed of 7 to 11 km/h. The floor plowing with paws is carried out to a depth of 6 to 16 cm. Processing of the floor with rollers from 3 to 6 cm. Treatment of soil with inserts of up to 25 to 30 cm.

READ

Roses over ...

Motoblock is a trailer.
Tractor class 3 or 4.
Capture – 4 m.
Transport width – 4 m.
Productivity – 44000 m²/h.
Dimensions – 5.6x4x1.4 m.
Weight – 1.77 t.

Diese l-Motoblocks

Diesel models have become increasingly popular in recent times because they have a larger life resource, can withstand high loads and consume less fuel.

Motoblock Lider WM1100B and WM1100BE

Motoblock Diesel Lider WM11100B

This machine belongs to the heavy class. It has a 9 strong diesel engine.
A hinges are directly connected to the power selection wave.
The size of the tires is 6.5 × 12. Thanks to this, an excellent continuation of the machine is achieved through any type of soil.
The weight of the Lider WM1100B without additional attachments is 150 kg.

The difference is the WM1100B and WM1100BE in the starting system, the latter is installed an electrical starter.

Motoblock Lider WM1100AE

In contrast to the previous ones, this tractor for a walk is equipped with an electric starter for a smooth and even engine start. The motor power guide WM1100AE is 6.5 hp.

Motoblock Lider WM1100AE

The changes also affected the appearance of the tractor of the walk behavior, which has now become easier to almost a third 105 kg.

Motoblock Lider WM610

This is another representative of the Motoblocks Leader diesel family. The power of his engine is 9 hp. At the same time, it weighs 30 kg less than the previous model, only 90 kg. Thanks to this, improved machine control and maneuverability are achieved.

Motoblock Lider WM610

The transmission on the hiking loss tractor WM610 has 6 steps: 5 forward and a back.
The width of the meal is 110 cm and the largest depth of the immersion of the grinding cutter is 25 cm.

Motoblock Lider WM13D

This tractor for walking behavior is equipped with a 1-cylinde r-fou r-stroke engine with 8.97 hp powers of the W177F brand from the leading world manufacturer of engines for small garden too l-Honda.

The total dimensions are 1800 × 1350 × 850 mm.
The largest width of capturing the milling system is 110 cm.

Working principle

This device does not have its own engine – a tractor is a sluggish force for it. The device can be attached or hung up. In the first case, the work organs (PAWS) hold C-strokes that vibrate easily and help the paws to clean the earth’s lumps faster. If the country is rocky, it is better to use exactly such mechanisms.

Hanging devices weigh less, they are more compact and can better maneuver. It is easier to use them and you can do this in areas of complex shape. The paws for the paws are straight. They reduce the cost of the product and differ in a high degree of reliability.

See also: fuel consumption Shantui SD16 – SD16, 22, 23, 32, 16L, technical properties, Chinese, caterpillar, repair, engine, fuel consumption

There is a third mechanism – a roller block that is fixed under the optimal inclination on the frame of the device. With their help, almost a hundred percent of weeds are driven outwards and three earthen layers are created. The lower layer is mediu m-sized, then a dense layer (bed for seeds) and above – a flooded layer (mulching). At the same time, roles can evaluate the floor perpendicular to the car.

Review of the attached devices

Motoblock of the brand guide achieved not only because of their high technical features, but also the ability to work with a variety of attachments.

cutter

plow

Rotor insert potato potato potato

Moto block branches

All owners of these machines should know the skills of their car and use maximum efficiency. The most popular additional attachments are:

Mill (used to mix the upper layer of soft soil);
Plug (produced a plow of virgin countries). When carrying out plows, it is necessary to create the first track. Then the Wal k-Fehind tractor is leaning and a bike is installed in it. The plow falls into the ground and plowing continues. So the first ditch buries.
Braids (allow weed from the area);
Potato cutters and potato (automate automation of potatoes);
Snowman and dumplings flip (are cleaned by the snow from the area);
Soil and caterpillars (improvement of the adhesion of the walk behavior tractor with the surface);
Adapter (allow you to control the seated device);
Weight agent (improvement of liability by increasing the mass);
Pendants (enables them to transport goods);
Pumps (allow irrigation from land);
Grinding (make small chips made of large branches).

READ

Ornamental grasses in the garden. How to plant them properly and take care of them?

Motor for cultivating “leader”. Is the leader?

Motor for cultivating “leader” (Russia, G. Kovrov). B & S-3.75 hp engine, 4-stroke, petrol, transfer belt, gear worm, 1 front, rear, cutting cap 3565 cm, milling cutter-120 … 130 per min., Depth, depth. Processing and processing-processing-processing processing-up to 12 cm is missing the performance selection system, weight 28 kg.

The leader belongs to the class of the light individual speed motor cultivating, which are supposed to carry out surgery – shit of the soil in front of planting.

Kovrovsky factory, no experience in the production of S.-KH. Mini equipment that acted rationally: do not invent the bike, but copied the well-known external model Gart-350 (shown in the photo).

Gart-350 motor cultivator, view of the right.

Gart-350 motor cultivator. View of the cutter.

Consumer analysis: Despite the increase in the demand for more functional motor breeders in recent years, this type will continue to be asked among the summer residents who plant every centimeter of their location and, due to the lack of sufficient financial resources and the exclusively manual workers, and only work manually. Inability to use motor breeders in narrow places. These summer residents only need one thing – in spring to dig a garden into a small depth with which the leader should be finished.

Construction features: According to the GART 350 model, which was selected to copy the model, the system set the only goal to make the cheapest motor cultivator. In principle, he succeeded. Or more precisely, it was almost successful. Why will we talk about it almost at the end of our analysis. But what had to be sacrificed for a low price? Control handles. They do not turn to the pages. And this means that the operator goes fresh sounds and tramples it. Yes, and walking on this floor is pretty difficult. The next disadvantage is a weak design. This is the result of the thin pipes from which the handles are made, and their fastening is not sufficient. At work, this is perceived by quite strong vibrations. We will make a reservation immediately: This disadvantage is inherent in all light breeders. Some vibrate less (Solo-502-A of successful Honda engine and knife with a zero cutting angle), others more (Euro 2 knives that are excessively twisted for this class and slide on the basis of an amateur class). You can leave vibrations with a professional engine and oscillation point on a more serious walk. A very good worm reducer was set up to the guide (much stronger than in Euro-2). But why worm? After all, the courtyard is not the 90s, the strengths and weaknesses of the worm have been known for a long time and therefore rely on a motor cultivator without rear equipment, which means that the leader of the extinction is doomed to fail. Let us explain this more precisely. The worm transmission has no return due to a large gait ratio. To ensure this, pull the motor cultivator with a worm transmission when you switch off. The mill will not turn around, it goes to the YUZ and turns around when they have just loosened (pulling the motor cultivator during the reversal, the often highly planted areas, i.e. where it is not always possible where you are turning around from a motor cultivator). Therefore, in modern motor types, gears with chain transmission (amateur series) or with gears (multifunctional technology) are worth it. Well, if you set a worm, make sure that you reverse. The designers save throughout the mass. For this reason, K.P.D. Cultivator 60%not. In other words, the horsepower defined in the engine is not fully used: the light motor cultivating person is unloaded. Therefore, there can be no question of working with plow or grave potatoes. Despite the fact that the engine is produced by the famous American motorcycle company, it should not be seduced that it is as durable as other engines of this company that are 3-5 times more expensive. Therefore, check the oil level more often so that the engine does not come before overheating.

User Guide

First start and runnin g-in

For a long and proper operation of the brand motor block, the leader must work correctly with it.

Before starting the new device for the first time, it is necessary to add fuel and oil to the appropriate compartments.
After that, the time of the motor runs in such a way that the details are violated with each other and work as a single mechanism without excessive friction.
The walk should take around 8 hours. At this point it is recommended to drive an empty trailer or grind with minimal immersion.
After completing the run, replace the engine oil.

READ

Type: October 25 - October 31st

service

Many owners of Leader branded engine blocks note the ease of their maintenance. You just need to change the oil in time. In the engine, it must be replaced after 25 motorized hours (it is necessary to use the M-10G2K). At the gearbox it is necessary to change the oil in the spring and fall (TAP-15V should be poured). It is also recommended to lubricate all control levers with waterproof grease.

Which is Better – Gasoline, Electric or Diesel Grower?

All cultivators are divided into types depending on the type of engine. It can be petrol, electric or diesel.

Electric ones differ in reduced weight and cost, but the owner should be prepared for the fact that the wires will have to constantly carry.

Gasoline and diesel are more mobile and reliable, suitable for soil processing in remote areas. If the soil is dense, then it is better to choose a gasoline model. As a rule, such cultivators are more powerful than diesel.

device

The cultivator is connected to the tractor: mounted or suspended. The device is reversed. A worm gear is installed on the device. The car vehicle with a trailer is equipped with paws that hold the racks. They vibrate and contribute to the quick cleaning of the paws of the ground punches. If there are a lot of rocks on the site, the walkover can easily cope with processing the field. A Scharbler motblock is lighter in weight, more canoeable and more compact.

This design is easier to operate. She has straight racks for paws. It’s more stable and cheaper. The cultivating mechanism has paws in the shape of arrows that, when they smash into the ground, loosen it while cutting weeds. Snowmen must be purchased separately. They perform inflection, the depth of the ditch reaches 30 cm.

Motoblock leader. Review of the installation, properties, attachments, use and operation

Motoblock Leader MB-950

One of the most successful products is the leader of the Leader brand. They are characterized by the simplicity of design, operation and maintainability.

Cultivator’s Guide Zid – Characteristics, Instructions

The leader is especially effective when used on small lands with light soils, treating the trunk circles of trees and shrubs. When turning the engine cultivator gearbox at 180 °, it is possible to install a brush that can sweep the territory both in the summer and in the winter periods.

Manufacturer of motor chips Leader – Open Joint Stock Company plans named after especially Degtyarev (ZID) is a diversified company, one of the largest in the mechanical engineering and defense complex of the country. Its history begins in 1916. The main products are intended for military purposes, but there are also civilian products, including hand-held favorite tractors and master grubber.

The engine pitcher “Leader” is produced in the work of the same name in Kovrov. V. A. Degtyareva.

Official website of the manufacturer of the motor pioneer Leader Zid – www.zid.ru

In order to ensure the work comfort of the cultivation by operation and transportation, the steering wheel can be adjusted with controls in height and folded in during transport. (The first disadvantage is that there is no steering wheel setting at an angle in the horizontal level.)

Petrol engine leader

Motoblock Lider WM1100D

This is a typical representative of the mi d-range motor blocks. It has a petrol engine with a capacity of 8.97 hp.
The Motoblock Leader 1100D is equipped with a thre e-stage transmission: there is increased, low corridors and backwards.
This model weighs 120 kg.

Motoblock Lider WM1100A

The main advantage of this model is the presence of an electric starter with which you can make the engine easier.

Motoblock Lider WM1050KX

This unit has an engine with 8.02 hp.

Motoblock Lider WM1050KX

The gearbox is mechanically with three steps.
The width of soil processing can be from 80 to 120 cm and the depth of the immersion is up to 30 cm.
The total dimensions of the motor block leader WM1050KX are 1500 × 400 × 900 mm.

READ

Plants that scare mosquitoes

This model is successfully used by owners of small gardens and small agricultural areas.

Motoblock Lider WMX650

The main working manager WMX650 is a petrol engine with 7 hp.
The mass of walking behavior is 85 kg.

Motoblock Lider WM11C

This is a tractor with a walk behavior with a dimensional dimensions of 980 × 570 × 760 mm. And a petrol engine with a capacity of 6.5 hp.

The width of processing in this model does not change and is 110 cm.

The preparation

The MK-1 driver of the motor cultivator has a soil width of 380 mm. The plowing depth is 200 mm.

Leader 4

Diese l-Motoblocks

Diesel models have become increasingly popular in recent times because they have a larger life resource, can withstand high loads and consume less fuel.

Motoblock Lider WM1100B and WM1100BE

Motoblock Diesel Lider WM11100B

This machine belongs to the heavy class. It has a 9 strong diesel engine.
A hinges are directly connected to the power selection wave.
The size of the tires is 6.5 × 12. Thanks to this, an excellent continuation of the machine is achieved through any type of soil.
The weight of the Lider WM1100B without additional attachments is 150 kg.

The difference is the WM1100B and WM1100BE in the starting system, the latter is installed an electrical starter.

Motoblock Lider WM1100AE

In contrast to the previous ones, this tractor for a walk is equipped with an electric starter for a smooth and even engine start. The motor power guide WM1100AE is 6.5 hp.

Motoblock Lider WM1100AE

The changes also affected the appearance of the tractor of the walk behavior, which has now become easier to almost a third 105 kg.

Motoblock Lider WM610

The transmission on the hiking loss tractor WM610 has 6 steps: 5 forward and a back.
The width of the meal is 110 cm and the largest depth of the immersion of the grinding cutter is 25 cm.

Motoblock Lider WM13D

The total dimensions are 1800 × 1350 × 850 mm.
The largest width of capturing the milling system is 110 cm.

Motoblock or cultivator – what is the difference?

The owners of the summer huts are often faced with the decision that it is better to buy a cultivator or motlock. Both one and the other unit have their own properties, advantages they need to know so as not to lose with the purchase.

In favor of the tractor of the walk behavior, its performance, performance, multifunctionality speaks. With their help, you can perform almost all types of agricultural work: plowing, hilling, growing, collection and transport of harvest, fertilizer, plants of seeds, etc. This is possible due to the presence of a special bracket for the installation of various attachments. Such technology is for processing quite large areas.

The cultivator attracts its small size, its lighter weight, the saving fuel and its greater maneuverability. Some models also have the option of adhering to different types of fastening devices. You can also find devices that are equipped with a gear at the rear speed. And in favor of the cultivator, the costs can only be taken, it is often many times lower than the prices for walkin g-Vertreher engines.

READ

Spraying of grapes with iodine solution

Review of the attached devices

Motoblock of the brand guide achieved not only because of their high technical features, but also the ability to work with a variety of attachments.

cutter

plow

Rotor insert potato potato potato

Moto block branches

All owners of these machines should know the skills of their car and use maximum efficiency. The most popular additional attachments are:

Mill (used to mix the upper layer of soft soil);
Plug (produced a plow of virgin countries). When carrying out plows, it is necessary to create the first track. Then the Wal k-Fehind tractor is leaning and a bike is installed in it. The plow falls into the ground and plowing continues. So the first ditch buries.
Braids (allow weed from the area);
Potato cutters and potato (automate automation of potatoes);
Snowman and dumplings flip (are cleaned by the snow from the area);
Soil and caterpillars (improvement of the adhesion of the walk behavior tractor with the surface);
Adapter (allow you to control the seated device);
Weight agent (improvement of liability by increasing the mass);
Pendants (enables them to transport goods);
Pumps (allow irrigation from land);
Grinding (make small chips made of large branches).

How do you choose a cultivator?

Several factors must be taken into account when looking for the perfect instrument for the job. Consider the tooth type, power source, size and portability in order to make the right choice for you and your needs.

Cabbago front grubber usually does not plant deep into the ground and are best suited for use in existing beds that require slight soil processing to weigh or fertilize the soil.

Heckziebasasen have large bikes in front of the tines and are ideal for new beds or heavily compressed soils. Racks can dig deep and raise sound and stones with every round. The best way to do is cultivated with vertical tines. They plow the floor like a blender and do everything in one round.

Energy source

An electrubber is suitable for existing beds that require moderate processing. These cultivators are generally less powerful than their petro l-powered counterparts, but often lighter and more compact. A ga s-grubber is useful to cut new beds and work in compacted soil. You have an unlimited lifespan and run with 2-stroke or 4-stroke engines. Although cheaper tw o-stroke engines need a mixture of oil and gasoline to run. Fou r-stroke engines are operated exclusively with gasoline, which makes them cleaner and more environmentally friendly than tw o-stroke engines.

The size

The wider the butterfly, the more soil it can cover, which means less passages over the bed to edit the floor onto the desired crumb and depth. However, this comfort has its price. Large cultivators are often heavier and more difficult to maneuver in small beds. Electrical cultivators are lighter, but not able to edit heavy floors, but work well in new beds where the floor is easy. A cultivator with 5 or 6 hp copes with a mediu m-sized garden. Large fields or orchards with heavily compacted soil benefit from the additional power of a machine with six horsepower.

User Guide

First start and runnin g-in

For a long and proper operation of the brand motor block, the leader must work correctly with it.

Before starting the new device for the first time, it is necessary to add fuel and oil to the appropriate compartments.
After that, the time of the motor runs in such a way that the details are violated with each other and work as a single mechanism without excessive friction.
The walk should take around 8 hours. At this point it is recommended to drive an empty trailer or grind with minimal immersion.
After completing the run, replace the engine oil.