Motoblock Centaur MB 3060b. Review, features, reviews

Motoblock Centaur MB 3060b. Review, characteristics, reviews of the owners

Recommend: 50%

contents

description

Motoblock Centaurus MB 3060B with a petrol engine with a capacity of 6.5 hp. Designed based on the design of the Circa 41A engine block. Best suited for processing small land charts with an area of ​​70 to 90 hectares.

Aggregation with a variety of auxiliary tools of agrarian and economic destiny makes a wal k-tractor extremely popular among owners of cottages, gardens and small farms.

The price of a centaur from MB 3060B is very attractive and fully corresponds to its operational characteristics and the declared technological parameters of this class 20.0-21.3 thousand rubles. The car will pay for itself in just 1-2 seasons of work.

Technical characteristics

Features of the Motor Block Centaur MB 3060b

In this model, the manufacturer takes into account all the requests from owners of Smal l-Gris e-Self devices in terms of efficiency, accessibility in work, ergonomic features.

• The power of the SH168 air-cooled gasoline engine is sufficiently sufficient when generating the necessary torque for stable operation with maximum loads.
• Thanks to the oil level sensor in the crankcase, automatic operation is ensured with a lack of oil – the engine stops or does not start at all.
• The rational operation of a Centaur with hinged units is reversed by the correct selection of speeds – 2 in front and 2 in reverse.
• Thanks to the special power stop system, fuel consumption is regulated in automatic mode – with similar loads and identical speeds, it will differ depending on the type and quality of the soil.
• Torque transmission is performed with a belt drive from the engine, one of the most inexpensive and reliable.
• Thanks to the adjustable set of cutters, it is possible to cultivate soil with a width of 400/560/800 mm and a depth of 150 mm.
• The steering column can be adjusted in four directions.

Complete with the Wal k-Fehind tractor MB 3060B GO: hubs and floor cutters, pneumatic wheels, a set of signs and shelters, a set of keys, clamps for cables, operating instructions.

reviews

The owners of the Walk behavior tractor, who left their reviews about its work, emphasize the high functionality and performance of the unit. He revealed no serious flaws.

Constantine, Perm:

I saw a similar motoblock of 3040 D, I worked on it. I realized that I was not enough power of 4 hp, so I took a Centaur 3060 MB with a petrol engine of 7.5 hp, now a different thing. I use it as often as possible. Basically cultivation, plants and trenches of potatoes, weeds, hayers. Who has a small area, only normal.

Vladimir, Kazatin:

Not difficult, the dimensions are also acceptable, the price is low, it works perfectly. Everything corresponds to the instructions.

Motoblock Centaurus MB 3060B. Review, characteristics, instructions, reviews of the owners

Motoblock Centaurus MB 3060B belongs to the household class of heavy agricultural machines that were developed for processing small saturated areas (up to 1 ha). Thanks to the available from and the possibility of using different binding devices, the motblock is popular with summer residents, owners of small landlopes and small farms.

Compact dimensions, excellent performance and declared capacity of 6.5 liters. With. They make a Chinese unit dissatisfied both on the open ground and in the greenhouse. The package of the MB 3060B motor not contains a foldable mill with three positions and pneumatic wheels.

Truzs of pneumatic fires

The cost of the Motor Block Centaur MB 3060B on the domestic market vary from 20,000 rubles to 22,000 rubles.

Features of the engine block Centaur MB 3060B:

• The mass of the motorized device is 82 kg.
• A single cylinder four of the SH168F-2 tact-powered power plant with a productive performance of 6.5 liters is installed on the frame. With.
• The engine is launched by a KIK starter (inertial manual).
• The mechanical gearbox has two front speeds and two back speeds.
• The management is carried out on the handle, which is regulated in several levels.
• The cutter is three sections and enables you to adapt the processing width from 30 cm to 90 cm.
• The depth of the mill in the maximum is 30 cm.
• In order to improve the stability, the manufacturer shifted the focus downwards of the motor block Centaur 3060b.
• The power wave is at a maximum involved in which you can attach the entire spectrum of the active fastening devices.

Characteristics:

User Guide

After buying a petrol engine, the Centaur MB 3060B should ensure that the instructions are available in the configuration. This document contains the next useful information for the owner of the tractor of the walk behavior:

• Principles of safe work with a walk tractor.
• The device and assembly of the device stepped down and accompanied by schemes and drawings.
• Properties of a motorized device.
• Motor start, production.
• Important maintenance phases.
• List of errors.

Read more: Motoblocks Dibrynya. Review of the installation, properties, attachments, use and operation

If you work with a tractor for walks, you can uncover your life (yours and loved ones). The reason for this is:

• Petrol – flammable combustible fuel (including their couples);
• Oils burn too;
• Boden mill – a design that is made up of acute sounds that rotate at high speed;
• The presence of a hig h-voltage wire, etc. connected to the spark plug, etc.

The instructions describe all nodes and mechanisms that require special attention from the operator with detailed instructions on the correct and safe actions.

First run and enema

For the first commissioning of the power plant, it is worth preparing in advance:

• Pour in fuel (petrol AI-92);
• Fill the crankcase with oil;
• Tighten the fastening elements;
• ensure the necessary tire pressure.

After you have carried out all of these simple steps, you can surely continue with the first commissioning instructions, which is described in detail in the instructions.

When the engine is started, we continue with the most important process that prepares the han d-led tractor for the upcoming loads and extends its engine life. This process is called or entered.

The enema begins with the war m-up of the engine and a gradual increase in load over 10 operating hours. The following steps are required:

• Warm up the engine;
• Neutral;
• Work with ¼ engine power;
• Load up to ½ performance;
• ¼ performance.

At the end of the enema, the oil should be completely changed.

Technical service

The instructions list all phases of the technical work, we list those who have to be carried out daily “before” and “after” the working layer.

• Reliability control of screw connections;
• Control of the fuel and oil level;
• Check tire pressure.

• thorough cleaning of the han d-led tractor;
• Washing the unit with water;
• dry in a shady place;
• Lubrication rotating parts and assemblies with lubricants.

Main disorders

Noises in the engine, do not start and go out:

• Bad quality of fuel and oil, their absence;
• Filter or hoses clogged;
• Screws dissolved;
• Lubricants of low quality;
• Gears are worn out;
• The warehouse has failed or incorrectly installed.

Do not rotate the earth’s knife:

• Knife are blocked (stones, lumps of earth, vegetation);
• dissolved screws;
• The clutch rope is loose;
• stretched or broken belt.

Video review

Overview of the han d-led tractor Centaur 3060b

Owner reviews

Eugen, 28 years old:

“I bought a model Centaur MB 3060B two years ago. There was no assembly, I did not fulfill the brea k-in, on the first attempt to start the engine, flocked out black smoke. The shop accepted an exchange without any, but trust had already been undermined. The second han d-led tractor was successfully retracted, it worked perfectly for the first 2 months, I tried not to load it. But then the straps could no longer stand it, burst. Replaced, works again, does the whole work, but I expect “surprises” at any moment.

Oleg, 33 years old:

“I plowed for a year as it should be, I mainly worked with milling and potato weights. I can’t complain, everything suits me. Let’s see how it comes from hibernation.

Sergej, 40 years old:

“I bought a Centaur MB 3060B for a symbolic price 2 years ago. Founded, repaired, somewhat reinforced, newly made. Now it works better than the original, it takes up both new territory and clay, the plow pulls without problems. But I prefer to mill, although I have to drive through two or three times in some places. “”