Miniator Kentavr T 15. review, characteristics, manual

Minitor Kentavr T 15. Review, characteristics, features of operation

The manufacturer recommends using the Minitor-Kentavr T 15 for the treatment of areas up to 2 hectares. The maximum carrying capacity of this model reaches one and a half tons.

The main advantages of the mini-tractor Kentavr T 15:

  • Japanese diesel engine Hochte Jal Kama 15 hp (hence sometimes the name T15D);
  • 3 stages of hydraulics (forced deepening, increasing and floating position).
  • The hydraulic system is protected from dust and moisture;
  • The cutter is driven by a double chain, which allows you to withstand heavy loads.
  • All components of the tentad Min i-acttoror are complete and consist of high quality alloys;
  • The wheels are unlocked, so that the machine can turn on a small area;
  • Ability to ride on common street roads (The Centaur T 15 contains all the devices and lights that are required for this).

Attachment Overview

Thanks to compatible attachments, mini-tractors have achieved popularity. Zentaurs can automate a large number of agricultural jobs. Let’s take a look at the attachment setup for these machines.

Cutters, cultivators, harrows, huskers

Cutters are the basic attachments on most Centaur miniatures. They are used to mix the topsoil of the floor and make it homogeneous. Thanks to such actions, the fertility of the soil is significantly increased.

After tillage with harrows, clumps of soil are often left on the hard soil. Harrows are used to break them up. If there is no desire to treat the land twice: first with cutters and then with a hammers, it is possible to use huskers. These are special discs with slices installed on them with teeth, which not only mix the floor, but also break immediately. Cultivators are mainly used to define lines for sowing agricultural plants.

This attachment is used with the Min i-Actractors Centaur for mixing poured floors. Centaurs have a smaller record than cutters. At the same time, they benefit from the depth of plunge. Cutters can agitate the floor to a depth of 15 cm, while planters can do as much as 20 cm.

You can find revolutionary plows, which have a special Leme design. The floor on them is turned over several times and then tossed aside. This breaks up the blocks and there is no need to go through the field again.

With the power of centaur servants, not one but two or three plows can be used at the same time, which increases the tillage area in the check.

Suspension and cart.

Centaur mini-plows have Kama diesel engines with plenty of traction. They are able to carry loads up to one and a half tons without any problems.

READ
Signs: September 21-30

When choosing a trailer, you need to pay attention to its load capacity.

follower .

Owners of Kentavr mini-tractors recommend using tipper versions for trailers, which are unloaded by simply lifting the vehicle.

Tilt angle and rake

Chinese manufacturer of mini – tractors offers to buy a rotary mower Kentavr. You can cut large weeds and medium-sized bushes. The speed of processing an area with a rotary mower and min-tractor is on average 5 km/h.

With the hydraulic system of some centaur models, you can connect two attachments at once. A rake is ideal for the mower. The working width is wider than a mower, with which you can immediately collect the cut grass.

Potato tedders and potato skimmers

To make agricultural work with potatoes easier over large areas, Zentaurs potato harvesters are used together with assembly devices.

With the potato harvester you can easily plant the crop in the ground in a short amount of time. A plow is placed in front of the trench, then the potato tubers are fed from the tank, and tits are fed from the back with two plows.

The simplest version of a potato roller is a conventional plow. However, the owners must be careful and set the position of the fasteners correctly, so as not to cut the potatoes. A more professional potato breaker is considered a centaur for mini – tractors. It cuts the bottom layer of soil and breaks the stack of soil with a crash, leaving only the root crops.

The snowman and dumplings

Snow plows are mostly used by residents of rural areas or local businesses.

If you need to remove a small section of road or curb, you can use an ordinary snow shovel. It allows you to throw the snow away from the street. If you need to remove a large area, it is better to use a professional snow shovel. You select a layer of snow and throw it away at a distance of up to 15 m.

Sprinkle

Spreading causes seed or can sprinkle on sidewalks and street roads in winter during icy conditions.

Brush

A brush is used to remove snow and debris. Widely used due to service programs.

Degree

Rear grade is used in landscaping, effectively driving soil or other mounds. It has the advantage of pulling the mounding behind it and not pushing in front of it.

READ
Motoblock Luchs MBR-16. Review, characteristics, reviews

Here’s an owner’s video review of how the soil is shredded:

Specifications

Performance, L.S. 15.
Weight, KG458
clutch disk
Engine type diesel
Articulation device installation да
brake Yes
Engine start Electric + manual
Fuel tank capacity, l 6
Choice of performance Choice of PIP
Wheels 4.00-12 и 6.00-16
Number of speeds 8 (6 forward, 2 forward 2)

Functions of use

Before using the Zentaur T 15 ensure that the fuel and oil are in the correct compartments and that the steering and braking systems are in good working order.

The mini-tractor is compatible with a large number of attachments, both from the manufacturer and from third-party manufacturers. This is achieved thanks to the universal hitch and high-quality hydraulic cylinder. For example, you can use such attachments as: plow, tiller, potato tiller, harrow, cultivator, suspension, mower, trailer, trailer.

Technical page and advantage of mini-contract

It should be noted that on the T-220 Centaur in the Moscow region can be a reasonable price, which varies in the range of 250 thousand rubles. This is the optimal cost for equipment of this level. With the right request, the device pays off already in the first year of operation.

There are other reasons to order the Centaur T-220.

  • Engine Made in Japan Kama. The reliability of the 22 hp engine has been proven by time and experience of Russian farmers. The mechanism is reliably protected against overheating, if the work is done in difficult conditions.
  • Speeds. The gearbox has 6 levels – 3 high and 3 low. At the same time, the minimum is 2 km/h, and the maximum speed is 45 km/h.
  • The presence of manual gas. Control of the mini-tractor became even easier due to the possibility of locking the speed with the handbrake. It is not necessary to keep the accelerator pedal pressed.
  • Improved off-road mobility. The locking differential keeps the rear wheels in sync and the tractor has plenty of ground clearance – 300 mm.
  • Improved diverter wave. The manufacturers took into account the wishes of users and created an independent wave of diversion. Now the joints do not stop working when you change speed, which is very convenient from a practical point of view.

User’s Manual

New owners should definitely study the manual of the mini-tractor Kentavr T15D. It collects and presents information about the structure of the device, its technical properties, the way of correct attachment of attachments, maintenance and minor repairs.

READ
Grape varieties from America

The Centaur T15 mini-tractor must have the engine running before it can be used to its full potential in the field. If you are purchasing a new model, the intro time sometimes passes in the store. Otherwise, the Centaur T15 engine should be run at minimum speed for the first 8 hours to allow the engine parts to lubricate and begin working as a unit. At the end of the entry time, the engine oil must be changed.

It should be noted that it is forbidden to use the small tractor for transporting people (the presence of the operator on one seat is allowed).

The basic configuration of the mini-tractor Kentavr T220

The basic configuration of the Kentavr T220 mini-tractor includes the following elements:

  • assembled mini-tractor, which contains the following components;
  • Heckzapfwelle;
  • Double brake pedal (specially designed for greater user comfort);
  • Three-point attachment system;
  • Parking light;
  • High-beam headlights;
  • Potter socket;
  • Two rear views;
  • Replacement parts for assembly and minor repairs;
  • Owner’s instructions;
  • Warranty certificate;
  • Wheels (4 pieces).

At the request of the customer, hubs for the rear wheels can be purchased in the tractor kit – this will allow the farmer to edit the crops.

Minitractor Kentavr T220 Minitractors Kentavr minitractors are already for sale. Some models are already retracted and can operate immediately with full engine power. Check with your supplier or the online store where you can buy a mini-tractor to see if you need to enter. The warranty period for the machine is 1 year.

device

Small tractor Kentavr T 15 has all-wheel drive. Combined with the wide tire profile and high ground clearance, this provides easy driving on the viscous floor and in the spring on the field.

The track width can be adjusted depending on the job in hand.

All controls are located directly in the owner’s cab, and the machine can be operated from there.

Owners reviews

Anton, Krasnoyarsk:

“I’ve had this model for two years now! I’m very happy with it. I’ve almost been in a swamp – it flies great everywhere. Advantages: powerful, maneuverable, fast, you can accelerate to a maximum of 50 km/h. On the site, it does all the work, the usual tillage (plowing, hilling, planting, planting potatoes, ditching) and transportation of goods, I go with him to the wholesale store and buy products there. This equipment really helps me out!

READ
Zoomlion ZD320-3 bulldozer - description and properties

Disadvantages: noisy and expensive. The car is good, I can recommend it to everyone.

Service

The Centaur T15D small tractor requires regular engine oil changes for proper operation.

The manufacturer recommends this every 100 hours of operation. It is recommended to use M-10G2 or its analogue.

Minitor Kentavr T 15. Review, characteristics, features of operation

Recommendation: 100%

content

description

The manufacturer recommends using the Minitor-Kentavr T 15 for the treatment of areas up to 2 hectares. The maximum carrying capacity of this model reaches one and a half tons.

The main advantages of the mini-tractor Kentavr T 15:

  • Japanese diesel engine Hochte Jal Kama 15 hp (hence sometimes the name T15D);
  • 3 stages of hydraulics (forced deepening, increasing and floating position).
  • The hydraulic system is protected from dust and moisture;
  • The cutter is driven by a double chain, which allows you to withstand heavy loads.
  • All components of the tentad Min i-acttoror are complete and consist of high quality alloys;
  • The wheels are unlocked, so that the machine can turn on a small area;
  • Ability to ride on common street roads (The Centaur T 15 contains all the devices and lights that are required for this).

Specifications

Performance, L.S. 15.
Weight, KG458
clutch disk
Engine type diesel
Articulation device installation да
brake Yes
Engine start Electric + manual
Fuel tank capacity, l 6
Choice of performance Choice of PIP
Wheels 4.00-12 и 6.00-16
Number of speeds 8 (6 forward, 2 forward 2)

Functions of use

Before using the Zentaur T 15 ensure that the fuel and oil are in the correct compartments and that the steering and braking systems are in good working order.

The mini-tractor is compatible with a large number of attachments, both from the manufacturer and from third-party manufacturers. This is achieved thanks to the universal hitch and high-quality hydraulic cylinder. For example, you can use such attachments as: plow, tiller, potato tiller, harrow, cultivator, suspension, mower, trailer, trailer.

User’s Manual

New owners should definitely study the manual of the mini-tractor Kentavr T15D. It collects and presents information about the structure of the device, its technical properties, the way of correct attachment of attachments, maintenance and minor repairs.

The Centaur T15 mini-tractor must have the engine running before it can be used to its full potential in the field. If you are purchasing a new model, the intro time sometimes passes in the store. Otherwise, the Centaur T15 engine should be run at minimum speed for the first 8 hours to allow the engine parts to lubricate and begin working as a unit. At the end of the entry time, the engine oil must be changed.

It should be noted that it is forbidden to use the small tractor for transporting people (the presence of the operator on one seat is allowed).

device

Small tractor Kentavr T 15 has all-wheel drive. Combined with the wide tire profile and high ground clearance, this provides easy driving on the viscous floor and in the spring on the field.

READ
A blower and vacuum cleaner for every garden

The track width can be adjusted depending on the job in hand.

All controls are located directly in the owner’s cab, and the machine can be operated from there.

Service

The Centaur T15D small tractor requires regular engine oil changes for proper operation.

The manufacturer recommends this every 100 hours of operation. It is recommended to use M-10G2 or its analogue.

  • Transmission oil should be changed once in spring before starting field work or every 1000 hours of operation in year-round use. The operating manual recommends that owners use Tap-15v.
  • It is necessary to periodically clean dust and oil stains from the body of the mini-tractor, check tire pressure and adjust clutch and brake pedals every 50-100 hours of work.
  • At the end of fieldwork you must carry out the preservation work, which means cleaning the tractor from dirt, drying it, draining the oil and fuel, lubricating the parts to prevent corrosion, covering it and storing in a dry place.

Video review

The video review shows the start-up and the principle of operation of the Kentavr T15 mini-tractor with a reaper:

And here is a video review of the operation of the engine in the store:

Owners reviews

Here are what reviews can be found on the forums from the owners of the Kentavr T15 mini-tractor:

Vladimir:

T15D has a quality diesel engine, which always starts on the first try. Quality hydraulics, which can lift attachments that two people can hardly get off the ground. The cutter bar works well when properly assembled.

Of the disadvantages, the bolts are weak, when they come from the factory, they need to be tightened.

As the load on the motor increases, the belts come loose. It twists, pops, and breaks. I solved the problem by installing an extra tensioner on the bottom.

Rating
( No ratings yet )
Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: