John DIR-9430: Technical Specifications
Universal agricultural tractor John DIR-9430 belongs to the 9030 series of productive energy-intensive tractors with output from 388 to 543 hp or 289 to 405 kW (according to EU standard 97/68). This machine was produced in the early 2000s, and in the 2010s it was replaced by the John Deere 9 Series (9R, 9RTB 9RX). Designed for general purpose, the John Deere-9430 tractor performs heavy, energy-intensive technological work, including sweeping the soil and seeding, which requires agricultural tilling.
Since the launch of John Deere 9000 series tractors in 1996, this powerful machine has been in high demand on large farms throughout Europe. The reasons for this recognition are exceptional reliability, high performance and productivity. In addition, these power-packed tractors, with their impressive size and high power, are very comfortable and easy to operate.
The 9030 Series is the most powerful tractor offered by John Deere since the early 2000s. Their high horsepower allows them to demonstrate the most efficient work with wide-cut and point implements. Putting the tractor to work allows you to work more acres in less time. And with the Greenstar system, ceilings are lowered, making the equipment more efficient and economical. All of this improves and speeds up all current work during the season.
The layout of all 9030 Series tractors, including the John DIR-9430-IS-SEPEN-AGTION, is three-piece. The front and rear axles of this tractor model are structurally 3048 mm long with a diameter of 110 mm. To reduce the load on the topsoil, the tractor is equipped with two front and rear wheels.
In addition, there is a tracked version of this model “John Deere-9430”. In this version, an air cushion suspension system is implemented. It separates the chassis of the crawler version of the tractor from its frame. This creates the necessary conditions for extremely soft and smooth movements, allowing high working and transport speeds to be achieved. New improvements over the traditional “9000” series in the John DIR-9430T tractor are the rigid frame, new Caterpillar centering system and new caterpillar belt and drive wheel designs that reduce slipping.
All 9030 Series tractors have the option of attaching additional interchangeable ballast weights to the front and rear axles, as well as to the frame of the autorama. John Dir-9430 weights range from 15,105 to 23,133 tons. The tractor is equipped with very powerful lights of the Field Vision lighting system, with which you can work at night just as well as during the day.
In darkness, the machine operator can maintain full control over the tractor and all excluded devices. Previously, for many years, high-beam lamps were only mounted on the front of the tractor. The John Deere-9430 has the advantage of putting the high-mounted lamps at the rear of the tractor. They provide a perfect side, front and rear view of all tracked implements, including the most common ones.
The John Deere-9430 tractor has maximum versatility in terms of compatibility with all types of attachments and attachments. Three-point rear quota, multiple glue options to choose from, and a multifunction power wave give this powerful piece of equipment the versatility it needs. There are excellent options for striving for the far-impacted pneumatic seed; Heavy plow pull and lift. Grain transport drives.
Cat 3/4N or Cat 4/4N 3-point hitch with quick coupler allows for up to 6.940 lbs. The 45 mm with 1,000 rpm gives greater capacity for milling unit travel, grain trailers, and everything in between. The new electric hydraulic selection is activated at the push of a button.
The Model 9430 tractor is available as a standard option. The model was equipped with a category “CAT-4” hitch (in more powerful models 9530, 9530T, 9630 and 9630T category “CAT-5” for the majority of not all existing implements). Some John Dir-9430 tractors are equipped with a three-point rear dog with a “quick coupler” clutch (this is an optional extra at extra cost).
The tractor successfully exacerbates and shows maximum profitability with such trailed equipment as conventional or disc pre-plow, stipe, rifled harrow, cultivator, mechanical saw, precision sector, rifled pneumatic suction, combination unit, bale baler.
The manufacturer recommends the efficiency of each pass with an integrated automatic control of its own design. The green star system makes it possible to control the tractor automatically, almost without the machine operator’s involvement. Auto-Trac works with a free SF-1 or SF-2 signal with an accuracy of ± 10 cm from corridor to corridor; or “RTK” with a repeatable accuracy of ± 2 cm.
This high “precision farming” operation helps you work faster and finish plots in less time. It also minimizes overlap zones – and that’s a real savings in diesel fuel, seed, fertilizer and chemicals.
The John Deere-9430 is powered by a 6-cylinder in-line diesel engine. This engine is equipped with a turbocharger, with an air-to-air secondary cooling system.
Water separator; Two-stage air filter with fine particle suction by engine cooling system fan. Self-braking fuel system makes it easy to change the fuel filter. Powerich engines feature quick and clear throttle response.
This four-valve engine creates excellent low-end torque and flap-opening sensitivity for maximum traction, and improves cold-weather starting performance. Powertrain reliability is also improved because the steel piston is cast with a small shore specialist with directional cooling. Such pistons reduce engine stress, lower internal temperatures and increase cylinder life. The lubrication system is pressurized, with full river filters. The Var i-Cool Cooling fan drive is equipped with a variable speed capability.
- Working volume is 13.5 liters.
- Cylinder diameter is 132 mm and stroke is 165 mm.
- Compression ratio is 16: 1.
- Rated power is 317 kW or 425 hp, at 2100 rpm.
The fuel system is characterized by high-pressure pumps “Eui” with electronic control of injection. It provides high injection pressures of up to 1800 atm; High hydraulic efficiency; Low specific fuel consumption. Constant engine torque ranges from 1600 to 1900 rpm. Two-level filtration system, with water separator and service registration lamp: 10-micron cartridge, 2-micron screwdriver element.
The Power Tech Engine responds appropriately to changes in operating conditions. You can get up to a 10% increase in power and
38% increase in torque. And that’s also about 38 to 54 hp. Perfomance.
Disciplined refueling is done in the 1,325-liter capacity tank (see
John Dir-9430) or 1249 liters (Caterpillar “John Dir-9430t”).
Fixed, tiltable hood has two positions: for
regular maintenance or in the repair position. All service points are easily accessible. Oil and coolant level checks are quick and easy. Air filter replacement is quick and easy while standing on the floor.
Model 9430. Model is equipped with automatic 18-speed manual transmission “automatic power shift”. There are 6 reverse programs. The gearbox has gears, which are in constant mesh and friction clutches with electro-hydraulic drive. Speed range is from 2 to 42 km/h. Thanks to the power delay system, transmission is possible without power outage. It is also possible to select the desired mode of operation depending on changes in load on the machine to be aggregated. Controlled electronically, the machine operator can work in automatic gait control mode.
With the handy shift lever on the Comand Arm Control, you can shift between soft and 6 reverse gears with a single flick of the finger. The movements of this lever – to park position, neutral position, forward or reverse position, and up or down corridors – are very easy.
The automatic transmission also contributes to improved fuel economy and optimized performance. The transmission senses engine load and throttle position in real time and automatically selects a gear to maintain the appropriate tractor speed during fieldwork or transport. Automatic gear shifting reduces driver fatigue and improves traction. Transportation can be carried at 40 km/h on the wheeled tractor and 35 km/h on the tracked tractor.
The hydraulic system of the John Deere-9430 is designed as a load-sensing system with an adjustable “closed system” pump. The capacity of this pump is 182 liters per minute. The number of remote controlled electro-hydraulic valves is four. The pressure of the bypass valve is 19994.8 kPa. A fifth and sixth valve are also available as an option.
The valve mechanism provides control in 6 positions, including neutral, retract, stow, retract lock, retract lock and float.
The number of internal valve parts has been minimized to reduce potential wear points and increase overall reliability.
Tractor dimensions and weight
- length – 6,960 m;
- width – 2,934 m;
- height – 3.556 m;
- turning radius – 4.45 m;
- operating weight without counterweight – 16,116 tons.
John Deere-9430 tractor cabin
This model is equipped with a modern and comfortable cab model Command View. It has excellent soundproofing and an impressive usable space. The desired microclimate in the cabin is created and maintained by the modern Clima Track climate system.
The cab has maximum glazing and a panoramic view from the driver’s cab in all directions. The hood hides the large 6-cylinder engine and is specially tilted to provide good forward visibility. Visibility to the rear of the tractor is also impeccable, making it easy to attach any equipment. The mirror is double, electrically adjustable.
Optional features of the 9430 include Active Seat heating, leather upholstery and a leather steering wheel braid. All controls of the powerful machine are literally at a distance. A large backlit corner monitor (located in the corner post) allows you to simultaneously control engine speed, gear selection, ground speed and other functions. The Command Center LCD screen allows you to program and monitor more than 20 different tractor functions.
John Deere-9430 Tractor Reviews
There are very few reliable reviews of tractors of this model on the web. Which is not surprising: on farms they are extremely rare. The available statements can be reduced to the following conclusions. The price of this equipment is rather high and its maintenance/repair is also very expensive. That’s why John Deere-9430 can show its best side only on large farms with large areas under crops. There, and only there, are the costs per hectare really reduced to a minimum. For medium and small farms, it is better to take 2-3 Russian (or Belarusian) tractors for the same money.
An even greater rarity in the fields, an even greater exotic is the John Deere-9430t crawler.
The cost of a John Deere-9430 in 2018
Announcements about the sale of used tractors “John Deere” 9430th model for the whole Russian Federation no more than a few. In the first case, the tractor of 2007 production year with the production of 11 thousand motor hours will be put up for sale in the Ryazan region. The price for it is 5,500,000 rubles. In the second case, in the Ulyanovsk region, a 2006 tractor with the production of 7,000 cows, for which the price is 4,900,000 rubles.
John Deere 9430 tractor
The John Deere 9430 all-purpose tractor is the second most powerful model in the Ninth Series. These machines, the most sophisticated in the line, are assembled at the factory in Waterloo, Iowa, USA. You can do the most demanding and tedious tillage jobs with a variety of wide-cut seeding and tillage implements. The 9430 is available in two versions, wheeled and rubber-tracked. The second version has the designation 9430T.
Photo: John Deere 9430 wheeled tractor
device and controller
John Deere puts the ergonomics, comfort and convenience of the operator’s workplace at one of the first places. When he’s comfortable to work in, productivity and efficiency go up, and the return on investment goes up accordingly. The tractor cabin is constantly being improved, becoming more spacious with each restoration school, the glazing area is increased for better inspection. The operator’s seat has so many adjustments that it would make a business car owner jealous. With touch color, you can make adjustments for efficient operation in a matter of minutes. The operator’s seat can pivot to a specific angle to control operating equipment.
Image: John Deere 9430 cab.
engine and transmissions
The John Deere 9430 is powered by a JD PowerTech Plus, in-line, turbocharged, six-cylinder 425 hp, liquid-cooled 13.5L engine.
The machine is equipped with a manual PowerShift transmission with an automatic chassis and an efficient control system. The operator can select three control modes – manual shift, semi-automatic and automatic shift. Shift range is 18 forward and 6 forward. Automatic transmission control allows the operator to set the necessary speed, and electronics select the gearbox depending on the load and optimum engine speed. To disengage the automatic transmission and change to the manual gearshift, simply press a button on the control panel or use the function selection on the touchscreen display. The efficiency manager ensures maximum efficiency with minimum fuel consumption.
Chassis and steering gear
Install hydrostatic cushion supports – on wheels and conditioning systems – on crawler tractors that are in ground state. You don’t need additional adjustments if you go from street to field or vice versa. In the case of roller tractors, the suspension reduces resonant vibrations and provides better control on the floor, allowing you to work more efficiently with larger tillage units. The suspension also reduces the need for suspended ballast and counterweights compared to similar models from other manufacturers. Due to the increased track surface and soil geometry, the tractor has excellent traction. The caterpillar frame is reinforced with a metal cable to increase belt life.
Caterpillar undercarriage has no rigid connection to the main frame. A connecting pivot allows the tire and arm to roll and swivel freely. Comfortable movement on uneven terrain is provided by reinforced pneumatic pads and shock absorber.
The steering uses a vibration compensation system that also transfers shocks from the suspension to the uneven field and helps keep the trajectory straight at high speeds.
Hydraulics and accessories
The tractor can be equipped with a PTO (from) with electro-hydraulic clutch actuation to be able to work with active trailers. A starting power of 320 PS/238 kW at 1895 RP can be developed from. As an option, the manufacturer specifies a three-point hydraulic tank with traction sensors and offers additional traction when working with heavy unsealed devices. This hitch is equipped with a quick-release coupler and can be rated at seven and nine tons.
The tractor has a load-sensitive open hydraulic system with an axial piston hydraulic pump. The hydraulic dealer is designed in such a way that eight additional selective sections can be mounted on it, which provide a flow capacity of up to 435 liters per minute. This is made to work comfortably with wide, low engine speed devices such as B equipment.
The operator can operate and control the unit using the touch screen display or the buttons on the control console. Depending on the needs of the buyer, devices or a pump with a capacity of 220 l/min. (for tillage implements) or several pumps with a total capacity of 435 l/min (for wide area seeders).
|Engine power, hp.||425||439|
|Fuel consumption, l/hp.||7-8||7-8|
|Fuel capacity, L||1324.8||1249.1|
|Road release (approval), cm||52||40|
|Manufacturer||John Deere||John Deere|
Photo: John Deere 9430T Caterpillar tractor at work
strengths and weaknesses
The advantage of the John Deere brand as a global brand is comprehensive support. All major, major and critical components are designed and manufactured in the group’s factories. Agricultural equipment dealers work around the clock during the planting or harvesting season and understand that machine breakdowns and downtime can mean major losses for those involved in agricultural production.
Disadvantage of this technique is one – the complexity of design and, accordingly, difficult to repair. Even in case of a small malfunction it is impossible to carry out diagnostics and repair without special and expensive equipment. It can be done only by specially trained personnel from the seller’s staff.
Due to the fact that the John Dir 9430 was discontinued in 2011, new machines are not available due to the introduction of a new, more advanced modification. Used machinery from 2007 – 2011 production years and with a capacity of 1,000-7,000 uteruses, can be purchased on the American market for about 125,000-220,000 U.S. dollars excluding transportation and customs costs. Considering the purchase of used equipment, it is necessary to carefully analyze its condition. One of the best options is to contact an authorized John Deere dealer. All the information about the operation of equipment, actual production, major and minor breakdowns, and how the machine was used, is ultimately recorded by the manufacturer (the dealer requests such information from the previous owner and offers it to a potential buyer). This practice is followed by almost all equipment manufacturers, especially those whose machines belong to the premium class.
You can buy a tractor from hand, then the price will be lower, but the risk of taking a “killed” machine will increase.
The closest analogues of the model 9430 in approximately the same price category are:
- Buhler versatile 2375, 375 hp, made in Canada.
- AGCO Challenger MT865B with 517 hp made in the USA
- Caseih 435 with 435 hp made in the U.S..
We have two John Dir 9430 wheeled tractors in our fleet since 2009. The tractors are good, they do 150% of the work during the sowing season and work 24/7 in emergency mode. We hardly ever work in winter, even if only a few times a month, we haul feed and manure. The service is a bit expensive, but so far nothing has broken down. Operate also New Holland – 1 unit, the service will be cheaper. Petr, Mogilev, Belarus.
One year ago our collective farm cultivated 5,000 hectares. Now the area has increased to 8,000 hectares, and the old tractors could not cope with the increased volume of work. And worked on old tractors, which were already 20 years old. Well, in connection with the increased volume and the fact that the old equipment is constantly in need of repair, it was decided to buy a new modern tractor for the test. After studying all the offers and consulting with the machine operators from a nearby farm, our choice fell on a tracked John Deere 9430t. The crawler tractor was chosen because all the arable land is not far from each other, despite our large country, and large distilleries are not far from each other.
The tractor cultivated 6,000 hectares in a working year. Despite the high cost of the tractor and its maintenance, we are satisfied with it. The machine has never let us down, it works more efficiently than older machines. Fuel consumption is less than a couple of older tractors that can do the job that John Dir 9430 buys.” Chairman of the collective farm “Rodina” Tolin Anatoly Vladimirovich, Kirov region.
For about five years they have been operating John Deere harvesters, and when the question arose as to which tractor to choose first, the meeting definitely decided on John Deere. Such equipment should be operated by specialists familiar with these machines. Several times we had small problems with the equipment, the service specialists reacted immediately.
With the appearance of quality machines in our farm, young people started working. Chief mechanic of agricultural company “Trud” Ivan S. Mescheryakov, Perm Region