Engine blocks Centaur MB 1010E. Overview, characteristics, reviews

Engine blocks Centaur MB 1010E. Overview, specifications, owner reviews

Recommendation: 100%

contents

description

Motoblock Centaur MB 1010E is one of the most efficient and reliable units for processing large plots up to 4 hectares. It is a logical progression from the MB 1080D (diesel) model.

Motoblock Centaur MB 1010E

Equipped with a Kama (Japan) four-stroke diesel engine, which is of high build quality. Such a motor is installed in all Centaur models.

Thanks to the water cooling system, the two-wheel tractor can run continuously for 8-10 hours at maximum power.

Despite the impressive weight of the machine (242-282 kg, depending on the modification), the MB Centaur 1010E walk-behind tractor is perfectly balanced, does not tip over and does not slip on difficult terrain. This is achieved through optimal weight distribution and the right size ratio. At the same time, the engine block is characterized by high maneuverability and ergonomics for the operator.

Modifications Centaur MB 1010E

Several versions of the Centaur MB 1010 walk behind tractor were developed, differing in some design and technological features.

Centaur MB 1010D

Centaur MB 1010d (diesel) has two gear ranges (6 forward gears and 2 reverse gears), 2 PTO shafts, single disc clutch. Thanks to the decompression valve, the device starts quickly. With a trailer, the Centaur MB 1010 D can transport more than 1 ton of cargo.

The Centaur MB 1010D version is equipped with an electric starter, has a power of 10.5 hp, a two-disc clutch and, accordingly, has the highest price in this group.

The complete set of walk-behind tractors may additionally include: a tiller, a plow, a seat and other attachments.

Technical characteristics
engine Single cylinder 4-stroke
Maximum power, hp/kW 10/7.41
Top speed, crankshaft, RPM. Minimum. 2300
fuel type diesel
launch system manual start
engine cooling system Radiator water cooling
Displacement, cm³ 573
Fuel consumption (maximum), l/h 1.87
Fuel tank capacity, l 5,5
transmission reduction gear
drive unit V-belt drive (3 belts)
clutch type Single disc dry type with permanent friction clutch
Number of gears, forward-reverse 6/2
wheel size 6.00-12.00
Attachment width, mm 1000
mounting depth, mm 190
Dimensions of the walk behind tractor (L/W/H), mm 2170/900/1150
Empty weight kg 246.80

Centaur MB 1010-5

Modification Centaur MB 1010-5 with a tiller and a plow is distinguished by the presence of 3 PTO shafts. The front is for connecting a snow blower, mower and other belt driven hitches. The rear (gear) drive is used for the rototiller, the side pulley is used to connect the motor pump.

READ
Photon minitractors. Series overview, properties

Modification Centaur MB 1010-5

The unit is mounted on a reinforced frame equipped with a reduction gear and a multi-speed gearbox. The presence of a plow and an active cutterbar in the MB 1010-5 configuration allows for effective processing of large areas. Thanks to the differential, the device can perform a complete 360° rotation on the spot.

Technical characteristics
engine Single cylinder 4-stroke
Maximum power, hp/kW 10/7.41
Top speed, crankshaft, RPM. Minimum. 2300
fuel type diesel
launch system manual start
engine cooling system Radiator water cooling
Displacement, cm³ 573
Fuel consumption (maximum), l/h 1.87
Fuel tank capacity, l 5,5
transmission reduction gear
drive unit V-belt drive (3 belts)
clutch type Single disc dry type with permanent friction clutch
Number of gears, forward-reverse 6/2
wheel size 6.00-12.00
Attachment width, mm 1000
mounting depth, mm 190
Dimensions of the walk behind tractor (L/W/H), mm 2170/900/1150
Empty weight kg 246.80

service

The maintenance should be carried out regularly for stable longer minute.

  • First, it is necessary to carry out competent motor runs.

It is carried out in two phases. At the first start, the motor should 3 periods for 20 minutes (20 minutes + retirement 20 minutes) for a third of the power supply – approximately 3l.S. The second stage consists of the same cycles at 2/3 of power.

  • The oil is then replaced in accordance with the operating instructions.

In the future, the manufacturer will recommend a smooth increase in the power supply and load of the device during the work. The regulatory maintenance of the wal k-Fehd engineer Centaur MB 1010S is carried out at the frequency: every 150/ 800/1500 mothers every day.

Due to the improper operation of the devices or in hard work with assembly devices, problems can arise. Frequent malfunctions include overheating the clutch couplings. For removal, washing, defect, additional lubrication or replacement of camps is carried out.

A foreign noise can appear in the gear. To avoid such a problem, you should categorically comply with compliance with the features of the oil and the replacement by the manufacturer’s recommendations.

The video shows the work of a difficult walk in a centaur:

reviews

As for the reviews of the work of this unit, everyone determines the massiveness of the tractor of the walk behavior, but also its maneuverability. However, due to the poor quality of the machine of the machine, the Centaur deserves many negative comments.

READ
Checking the hand-led gasoline tractor with electrical start Tselina MB-802. Functions, advantages, videos, reviews

Maistrenko Nazar, Khmelnitsky region:

I have been working with a motor MB1010 for 3 years. No problems, only the belts changed in six months.

Sergey, Kharkov:

You have to buy a walk in advance and not only before the start of the work on the website so that there is time to find out, and in this case it is not possible to fix it. Now my Centaur MB 1010 works perfectly, but at first I could not collect any mills because the diameter of the holes did not match the knives. Then it turned out that the teeth had flowed on the hay fields and the grass was illuminated.

Motoblock Centaur 1010e. Review of modifications, characteristics, checks

The line of the motor blocks of the 1010 series of the Chinese manufacturer “Kentavar” represents professional heavy equipment that covers more than 4 hectares of sowing sowing.

Motoblock Centaur 1010

Due to their solid weight, these diesel engine blocks can also process supe r-free floors, and the power wave available in the design enables you to expand the functionality even more with the appropriate binding equipment.

In the coupling with an adapter, this heavy equipment turns into a comfortable and productive mini drive.

The full set for the engine blocks of this line includes milling cutters and plows.

Checking the Mot Block modifications

The line is shown by the following changes:

  • Motoblock Centaur MB 1010
  • Motoblock Centaur MB 1010-5
  • Motoblock Centaur MB 1010S
  • Motoblock Centaurus MB 1010D

Consider every model in more detail.

Centaur MB 1010

The productivity of the diesel singl e-cylinder engine DD190VA is 10 l. The cooler provides the required cooling of the power plant, which expands the motor resources of the entire device. The tractor of the walk behavior starts from an inertia.

Motoblock Centaur 1010

The friction doubl e-disc clutch offers a soft start and a movement without jerking. With a fou r-armed belt disc of the power selection, you can use a wal k-behavio r-tractor as far as possible with different functional devices. The step gear offers eight speeds (6+2), including “lower” and “increased” gears.

Active grinding cutter of the support wheel of Pneumolen

In addition to the grinding cutter and plow, there is a support wheel and pneumatic bikes with a strong profile. The mass of the tractor of walk injuries is 250 kg, the frame is reinforced and attached to five points.

READ
Features of grape pruning
Characteristics
Engine type DD190VA
Power, L.S. 10.0
launch system Manual
drive unit Brishmous equipment
transmission Gearbox
clutch type Windshield friction
class professional
Power, W 7500
The volume of the cylinder 573 cm³
cooling water
The weight 250 kg
Type of fuel diesel
Fuel tank capacity 5.5 l
Fuel consumption 1.87 l/h
Number of programs 6 forward/2 before
The width of the cultivation 800-1000 mm
The depth of cultivation 190 mm
Dimensions (dhshhhv) 2170x845x1150 mm

Centaur MB 1010-5

The mass of this motlock in devices is 246.80 kg. The device is equipped with a diesel power plant with cooling cooling. Start from the injector (manual) starter.

Motoblock Centaur 1010-5

The gear, the clutch is dry, friction, tw o-Disc. Cleanomic drive (3 straps), a mechanical gear with “lowered” and “increased” speeds (before 6 and 2 before 2). The handles are soft steering column that are set in three levels. There is a differential unlock.

Read more: Brait BR-75 Motoblock. Technical characteristics. Features of the application and maintenance of the model

Characteristics
engine A cylinder, 4th stroke
Power, L.S. 10
fuel type diesel
launch system Manual
Cooling system water
Engine volume, cm3 573
Fuel consumption, L 1.87
Fuel tank capacity, l 5.5
transmission Gearbox
drive unit Glue
Summary of the programs 6 forward/2 before
Width cultivation, mm 1000
mounting depth, mm 190
Dimensions, mm 2170/900/1150
Weight (KG 246

Centaur MB 1010S

A feature of this diesel engine MM 1010S with a ten-axis power plant is an air filter in the ingredient age with four cleaning levels and a changing electricity generator with an increased power of up to 200 W.

Motoblock Centaur 1010e

Cooling water cooling reliably protects the engine from overheating. The mechanical control point with simplified gear shifts from “increased” to “low” and vice versa, which means there are 6 front speeds and 2 vice versa. For the connection of VOM there are three waves of the selection of performance with a strap wheel (four board pulp). The mass of the Centaur MB 1010S – 268 kg. Unlocking the differential of the bikes offers excellent maneuverability.

Characteristics
Engine type DD190VA
Power, L.S. 10.0
launch system Electrostart/manual
drive unit Brishmous equipment
transmission Gearbox
clutch type Slice friction (2 slices)
The volume of the cylinder 573 cm³
cooling water
The weight 250 kg
Type of fuel diesel
Fuel tank capacity 5.5 l
Fuel consumption 1.87 l/h
Number of programs 6 forward/2 before
The width of the cultivation 800-1000 mm
The depth of cultivation 190 mm
Dimensions (dhshhhv) 2170x845x1150 mm
READ
Swimming series of the snow owners Hyundai: Description, characteristics and reviews

Centaur MB 1010D

The mass of the diesel motor block 242 kg. The unit received a powerful R190 per power supply with a capacity of 10 hp. Cool cooling, starting manual and electrical steel, four organic. Pulp and three Wom.

Motoblock Centaur 1010d

Motoblock Centaurus MB 1010D is equipped with an oil filter, an extended generator and a gear gear. There is a mechanical gear with “reduced” and “increased” speeds, total speed: 6 front and 2 vice versa. The differential lock function enables the tractor of the walk behavior of 360 degrees. The depth of soil processing reaches 19-20 cm at 100 cm.

Characteristics
engine R190N
Power, L.S. 10
fuel type diesel
Cooling system water
Engine volume, cm3 573
Fuel consumption, L 1.80
Fuel tank capacity, l 5.5
transmission Gearbox
Summary of the programs 6 forward/2 before
Width cultivation, mm 1000
mounting depth, mm 200
Dimensions, mm 2170/900/1150
Weight (KG 242

Unmounted equipment

Motoblocks are equipped with a power selection shaft that makes the device’s aggregation considerably facilitating with additional fastening equipment, such as a plow and a mill for the cultivation of the soil.

Active Sabe r-deformed mill plow

The clothes are included in the kit for the tractor of the walk behavior, they are disassembled, but the instructions have drawings and a description of their collection. You can buy a plow separately. There are many video reviews on the functions of its use and aggregation on the Internet.

Instructions for the company

When buying a tractor for walks, we check the configuration and the mandatory availability of operating instructions. This document contains the following information:

  • The device of the device in the diagrams and with descriptions.
  • Properties of this model.
  • Preparation for the first start, start and running in the power plant.
  • Maintenance in levels.
  • Common malfunctions and opportunities to eliminate them.

First start

Particular attention must be paid to the enema, which begins immediately after the first start of the engine and lasts within 5 to 10 hours. During this time, the loads gradually rise, moving parts are grated.

At the end of the run, the oil must be replaced and filled with a new one. For Zentaurs, use the SS, SA, SD and St.

Technical service

Daily work before the start of work:

  • Check fuel mirror;
  • Oil control in the crankcase;
  • Review of fastening elements.
READ
Motoblocks Forz Mk 75 F. Review, characteristics, reviews

Daily work after the end of the work:

  • Cleaning, engine uni t-washing;
  • Dry in the fresh air;
  • Lubrication of all nodes.
  • Inspection once a month.
  • Conservation for lon g-term storage.
  • Inspection in the service center.

The main misalignments and ways to eliminate them

The engine will not start:

  • The fuel ended;
  • The filter, the pump pump and the fuel supply system (hoses) were blocked.

Motoblock Centaur

There is black smoke:

  • Problems with the fuel system.

Motoblock vibrates, tailors don’t turn:

  • Cut with earth or stones;
  • The clutch cable is separated;
  • The belt was stretched:
  • Fastening screws weakened.

Video review

Checking the motor block Centaur 1010d

Checking the cultivation by the engine Block Centaur 1010

Reviews of the owners

Alexey, 27 years old:

“Hello, three years ago I bought a 1010d center with a mill and a plow. I have a small farm, I grow potatoes per 3.5 hectares of land. It immediately bought an adapter, it turned out to be a compact and maneuverable tractor. He plants, sits, hill, chooses – all operations are mechanized. The car is good, but I follow the belts, I had to change a few times. Special thanks go to the manufacturer for the lighting – helps out. I can boast of a load capacity, translate a lot of freight freely, without tension and slide. “

Ivan, 36 years:

“The han d-led tractor is not bad (I have a 1010d with electrical starter), it is the best in the field, although it is necessary during the field work to stop the fastening elements regularly to check them – the screws loosen through vibrations. Comfortable soft handles, PTO! This heavyweight has only one disadvantage – the price! But it paid off in the first year of operation.

Vasily, 41 years old:

“I bought this monster last year. Drives through virgin soil without noticing the cargo. Cutters strengthened immediately. Very easy to use technology, but requires constant care. The han d-led tractor made it very easier for me to work, but the headlight is rather weak, I have to improve that. ”

Rating
( No ratings yet )
Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: